Search found 5 matches

by Rich S
Tue Jul 28, 2009 4:41 am
Forum: General Nistune Discussion
Topic: Speed calibration
Replies: 5
Views: 2521

you can always adjust the potentiometer on the speedo itself. You'll have to remove the speedo from the cluster to do it.
by Rich S
Sun Jun 28, 2009 2:00 pm
Forum: Innovate
Topic: LC-1 Narrowband settings for skinny o2
Replies: 1
Views: 2207

LC-1 Narrowband settings for skinny o2

I've got a redtop with the skinny o2. I'm having trouble finding the voltage perameters for the LC-1's analog out. I'm running an XD-16 gauge and have the analog1 outputs wired into the ECU's harness. Any info will be greatly appreciated. right now at 1v (read on the consult for o2) the car is dumpi...
by Rich S
Thu Jun 25, 2009 1:48 pm
Forum: Type 3/4/5
Topic: Anyone running Deatchwerks 740cc and Z32 afm on sr20det??
Replies: 2
Views: 1748

here you go. This map was created at 1500' elevation. The cars specs are: S13 SR20det blacktop with early version ECU (red top pinout) DW 740cc injectors Z32 MAF GT2871R turbo .64ar (1bar.) 3" turbo back exhaust Innovative LC-1 with narrow band output feeding ECU Run this map at your own risk. ...
by Rich S
Wed Jun 17, 2009 2:52 am
Forum: Type 3/4/5
Topic: sr20det intake manifold swap
Replies: 2
Views: 1782

this may be too late but... since you are changing injectors and everything else.... What I did was use the injector latency to setup idle A/F. then your k constant to get the off idle map roughed in before I started changing numbers in the cells. Then when I was done, I turned on the O2 and knock f...
by Rich S
Thu Aug 28, 2008 5:36 am
Forum: Type 3/4/5
Topic: o2 causing lean conditions?
Replies: 1
Views: 1792

o2 causing lean conditions?

Hi guys, My name is Rich. I'm working on an car I built for a friend: S14 chassis S13 blacktop GT2871R turbo Deatschwerks 760 Injectors Z32 MAF I followed the instructions on setting up a base map using the NISTUNE guide. I did have to change my latency value for Idle a/f after setting up the K valu...