Nistune Forums

got anything matt? it seems that the temperature is already set to $FF / 205 degrees on the stock z31 bins? if i set this to zero will it disable the cold start bs?

has anyone had any sucess getting rid of the bogging issues during cold start due to timing getting pulled? i know matt added some tables related to it, but im not sure how they are acessed or work. any input appreciated.

Bump, any new info on this problem?

nevermind, it still has problems. any tips on reducing noise/interference? i was looking at some snap on ferrite cores, think this will do anything?

so i tried using a few other usb cables i had to connect the ecu to the hub. I tried one that was about twice as stiff and thicker than the cable provided, and i tried one with a visible mesh shield.the clear one with visible mesh shielding seems to keep it from disocnnecting. guess ill use this one...

yes, everything operates normally when not using the hub and everything is plugged directly to the laptop. I just tested it with the ignition in the on position, but not running and it does not seem to disconnect. Whether the wideband is plugged into the hub along with the usb consult cable does not...

I just purchased a self powered 4 port belkin hub, in the hopes to attach my usb-serial adapter for my wideband, and nistune to a single usb cable. It seems that consult will disconnect every 10-15 seconds. the time it takes to disconnect seems to always be the same. Is there a fix for this, or is t...

relating to the timing map that can cause issues at 48-65 degrees... is this in the z31 binfile? timing goes retarted around this temp. for me...

did you change injectors? try raising K value and lowering latency to get idle back to 14.7?

screenshot

vg30et
techedge 2AO

afr shows correctly in the log player, and expanded log player. only wrong in the afr 3d trace.

if the log isnt playing, and you click on the traces at a particular point, the afr shows. only shows incorrectly when playing or fast playing.

Im having problems seeing the correct afrs when fast playing through a log with the afr input tracer open. it just shows 9.0 afr all over the board, meanwhile the log player shows correct data. I ran this log in the previous version of nistune, by deleting the "tp msb" column in the log fi...

seems like it may be a problem with using my usb-serial adapter, though it has always worked in the past. im currently using a different one now and its working ok.

I feel bad asking all these questions... Ive downloaded the new software and bin files. for some reason i can not connect to my wideband (techedge 2.0.) In the configuration menu, i can chose com port 3 or 4. neither will work, and i noticed i get an error saying it cant connect to com5. com5 doesnt...