Nistune Forums

Hi Matt, the ecu part number is MECM T133

thanks.

Hi somebody has any experience on D21 hard body? I´ve tried to tune these engine but I don´t have luck to do a good AFR on idle The K multiplier value for the original injectors is 300 and I put 440cc injectors and my k multiplier value is 136 and latency 700 but the wideband is always in 10.0, some...

Hi evey body, this is my new proyect 240sx S14 with rb25 series 2 swap and my setup is a nistune type 2 in a z32 ecu, 525cc STi injectors Z32 maf intake type greddy Q45 TB and turbo Holset HX40 internals stock. The question is how many psi can pull with internals stock? Need some advices because It ...

Hi, have one question, I'm working in these modification and my question is I must use the igniter chip? because my engine is series 2, or work directly in z32 ecu?

thanks.

My car is ready the last friday I went to the Dyno and the results are good. My setup is. Motor SR20DE+T CR 9:5 to 1 T28 turbo@ 12 psi. S15 Injectors Nistune type 3 Walbro 255lph SSQV 3 gen. bov In the first run got 228,24 whp and 231,32 par motor with loss at 5200 rpm and afr 10.3, on the second ru...

Hi TM_S13,

I'll try these today thank you.

Hi everybody have one question, today start to tune my new proyect. Is a B13 SR20DE+T CR 9:5 to 1, T28 turbo, 444cc S15 Injectors, Z32 maf and walbro fuel pump. my question is why have these jumps in the tp scales? is normal? http://i63.photobucket.com/albums/h144/rpsucilla/test-1.jpg Jump 74 to 84 ...

I am asking for support here:
http://forum.aempower.com/forum/index.p ... 406.0.html

Saludos...

Hi Matt. I did that, but doesn,t work whit their software, connet but don't have afr still in 18.00. I did a test using hyper terminal like the olders and don´t work, try whit 19200 bit per sec and work but the text was in volts not in AFR´s :( Let me make another test and post the results. Thanks.

I got the new aem inline uego wideband but these don`t work whit the nistune software, some one have any information to make work the new wideband? aem part number 30-2310

Regards.

What is the correct way to tune the VE map since i am not familiar with this map since OBD1 ECU's dont have it... You can use any bin oh B14VE by calum........ mejor español, Yo el ultimo board tipo 4 que le compre a Matt lo estoy usando en un B14 con SR20VE y utilice un bin de los posteados por Ca...

Matt the last weekend I've use the new release and the Wideband Input Tracer not work :? are something wrong? beacause with the last version don´t have any problem. I´m using AEM uego wideband and work fine with the program only don´t work the input tracer. Look http://www.youtube.com/watch?v=jOZuVV...

Now know who is STU
I Actually use my board to tuning after I finish, the customer will install a basic rom board and I have no complaint from anyone.

Respect your work and I'm not trying to demean anyone.

Thanks.

Darksun280 wrote:Nah i understand you clearly. Basically what you did is what I need to get STU to do to MY ECU so im int he same boat.

I don´t understand who is STU but you need this
To do yourself.

Hi every body, I have LC in my nistune type 3 board since last year put the launch control code in my base image file using tuner pro program (free SW) and later burn the base image file in the nistune board, this also applies to fan control code, let me know if you need as I did to do this. Matt y...