Nistune Forums

Just picked up this lap top fully refurbish for super cheap.....Ill let you all know how it does. Thanks guys for the inputs Dell Latitude D410 Processor Type: Intel Pentium 4 M Type: Netbook Processor Speed: 1.8 GHz Screen Size: 12 inches Processor Configuration: Single Core Operating System: Wind...

Great thanks again.

Thanks PL for the info. Its common to do the cam retard when your running these cams from the original cams its only 2 teeth had to get my notes again.. I am running a little rich in the tune because i wasn't sure on the K constant. The number 188 or 230(?) was the nistune value. How much does over ...

Hello All, Been working with my S14 Nistune board and i have a few questions. Got a basic tune done running 15psi feels good no knocks and decent times at the drag track but got to this in a weird way. I had a JWT ecu tuned for MSD 50lb injectors, Z32 MAF and a 50 trim stage 2 wheel. I have added 24...

Thanks Matt. I installed the LC1 today and removed the PLX. Its been giving me issues for awhile so doesnt surprise me. Thanks for the validity check.

Ahh Yes it is the same in both with AFR or lambda on Nistune window.. The file I sent you was showing 10.00 and that was with Lambda i do believe. But i think either the O2 sensor or the PLX box is going bad or is bad. Funky things were going on with it

Not sure if I understand your question Matt. Could you please rephrase it?

Hello Matt,
I am not sure if it is a nistune issue or my PLX has gone bad. I have an LC1 that will be installed. Too many issues with the PLX from day one. Ill email you the file.

Matt wrote:PLX software shows up fine?

Can you do a debug log for me? File-Configuration-Debug logging. Then restart, connect to only the wideband (no consult data) and record for a minute and the email me the log file

Will do. Email or post on here?

on the PLX it self it shows normal AFR progression depending on throttle etc. Along with Exhaust temp and MAF voltage basically normal progression. On the Nistune Software it shows Left hand side top block .680 Below that nothing is displayed. right block shows Exhaust gas temp, Below that Some funk...

This is the first time i had tried logging with my PLX R500 and got it to communicate just fine but it was weird. It shows my EGR temps and it shows my MAF voltage but does not show the O2 sensor working at all its a steady .680 any ideas....Works fine or i think on the PLX unit itself.

Matt attached are the Bin file and a run file. Run file was at 10PSi. The MAF being used in the car is a Z32 verified by part number22680 30p00 A36-000 N62 and MSD 50lb injectors.

Hello All, I pulled the tune from my JWT and placed it into my Nistune ECU. Now a few questions arrose when i was looking at the software compared to the Hardware. First one that i saw was injector K constant read 328 And after doing the calculation from stock injectors of 270cc to my MSD injectors ...

Just picked up this lap top fully refurbish for super cheap.....Ill let you all know how it does. Thanks guys for the inputs Dell Latitude D410 Processor Type: Intel Pentium 4 M Type: Netbook Processor Speed: 1.8 GHz Screen Size: 12 inches Processor Configuration: Single Core Operating System: Windo...

Hello all,
What type of laptop and software do you all use or recommend......Looking to buy just a tuning laptop...have a chance on getting a refurbished ibm t60 from work for cheap but it has xp professional on it. Any one use something similar to this?