All the other check boxes work fine (Trail, Follow, Flags, Shaded, Filled), but the 'Change' box does nothing, nothing is highlighted when the values are altered.
Latency decreases with increased voltage. I just plotted the published values for mine at various voltages and used the latency corresponding to the actual voltage they see.
Plus the fact you don't get a latency adjustment option for CA18DET ECUs
Isn't this just an inevitable symptom of compressor surge in conjunction with a hot-wire air-flow meter? Other than a recirc I can't think of a sure-fire way round this. The 'deceleration air' setting on an SAFCII forces the ECU to ignore AFM voltage whilst the TPS is between two preset throttle pos...
For the European models: 23710-39F05 0990 on AP-CA18DT.MT 23710-39F15 0990 on AP-CA18DT.AT 23710-44F00 0988 1089 CA18DT.MT 23710-44F01 0988 1089 CA18DT.MT 23710-44F02 1089 0990 CA18DT.MT and 0990 NAP.CA18DT.MT 23710-44F10 0988 0990 CA18DT.AT and 0990 NAP.CA18DT.AT Lambda ECUs are 39F (AP - Anti Poll...
Well, I appear to have sorted it :D It would seem that when I did the loom work & reconnected the ECU, the USB cable was no longer pressed firmly against the casing. Having had the ECU apart and checked everything, I was still getting constant drop-outs the moment I moved the car. Finally manage...
Right, I re-installed the ECU in its original position, tried different cables & grounded the laptop to the chassis. Also tried with the laptop powered via cig lighter and solely off the battery. None of this stopped the consult disconnecting every few moments. After the ECU relocation & wir...
I've just stripped out & re-routed the wiring in my 200SX, moved the ECU from its original grounded position and have had the USB Consult disconnecting every 5 minutes or so tonight, regardless of rev/load. I had also hooked up a Bee*R rev limiter along with my SAFC2 via the ECU +ve and ground a...
Hi Ed, spoke to you the other Saturday whilst you were working on the Rex, it was my mate (Ben) that asked you about mapping his VEMS. Small world, eh?