Nistune Forums

Hi Matt, I've now finished mapping the car but everything had to be done on the knock maps. If we made changes on the normal maps it didn't change the running of the car. The maximum knock reading that came up on the nistune consult gauges was 10 on gear changes so not even under load. Do you think ...

Hi Matt, have you had a chance to look?

Cheers
Richard

Hi Matt, any luck with this?

Richard

Hi Matt, I think it was only making a difference if the changes were made in the knock maps.

Once I get in from work I'll check the ECU number, the car is a UK RS13 Manual transmission if that helps at all.

*edit*

Here are all the numbers off the ECU casing

23710 39F05

MEC-D027 3109

Hi Matt, I've gone through your suggestions. I installed 0.10.10 and opened the knock panel and took the car for a drive with the knock sensor still connected there weren't any DTC error and the knock panel stayed blank. then I disconnected the knock sensor and turned the car on and the consult came...

Thanks Matt, I'll give those a try next.

Richard

Hi Matt, Ive gone through and tested the knock sensor back to the ECU and it was showing 555kohm. and I'm not getting any DTC codes on the consult now. when I first started the car on the map that was still on it I was getting it running on the normal maps but I was getting knock readings on the gau...

Hi Matt, should I use the info at nistune dot com address?

could you give me instructions on how to turn off the knock flag whilst tuning please

Cheers
Richard

I've tested the knock sensor that was on the engine and it came out at 568kohm I also tested a spare I've got and it came out at 557kohm. Also which of the two knock sensors would be best to put back on the engine? does anyone know what pin on the ecu the knock sensor goes to so I can test that ther...

I just had another thought, if the sensor is faulty or disconnected does the nistune or the standard parts of the ecu change any settings automatcally like knock the timing way back? as we mapped the car to the point that is wasn't det'ing and feeling good then left it for 2 hours or so walst chilli...

Hi Matt, thanks for that I'll test and report back.

Hi I'm new to the forum, I've had my S13 9 years but am very new to nistune. I've got a problem, mine seems to always be on the knock maps even on a base map at idle it sits on the knock fuel map and then when you rev it the knock timing map lights up green. it does the same thing with the knock sen...