Nistune Forums

Ok so it seems i find a solution and maybe the problem. I corrected the 10ms for the crank enrich after 50degres Celsius. Instead of the 70ms i put previously. I cranked the engine and nothing special but i looked at the battery voltage and it was 8Volts when cranking. Interesting thing. Then i trie...

Hi guys, I'm not a great nistune specialist and can't find any solution to make my RB3025 start properly. engine setup : RB3025 neo, blown HPXN1, 1200cc injectors, gtx3582r see the vidéo I made: https://www.youtube.com/watch?v=tZtCvFjYj54&t=19s latency is 1600 ; K is 540 It is quite strange that...

http://m.youtube.com/results?q=stalling%20problem%20what%20to%20correct&sm=3 Hi ! As tp limit didnt solved the problem, i decided to show you what is going on with another video (link on top) if you need any other info in nistune or in the engine, just ask ! Thanks in advance for your help :-)

I have no overfueling and I must say that i've nearly maxed the TP so I prefer to let 255 from 4800rpm for TPmax Apart from that, I've put all these number you said and i'll try tomorow. TPMAX 164 164 164 164 164 164 164 164 175 200 230 245 255 255 255 255 TPMIN 132 132 132 132 132 132 132 132 132 1...

Thanks for your post MAtt. I have now aftermarket cams (tomei 256 / 8.5m) and also my Mustang MAF and my 800cc injectors and no problems of eratic functionning on mine with the map correctly connected... So I find it weird you experience problems with the map as I don't. About my engine that stalls ...

OK Great, the map sensor works again, You were right, it wasn't plumbed were it should ! Thanks you. But this hasen't resolved my other problem : here is a short youtube clip to show you... https://www.youtube.com/watch?v=-UCZZ89STNI This is really anoying when the engine has stoped after an handbra...

Oh THAT seems to be the solution of my MAP problem !! Thanks.
I'll test that in few weeks. Thanks a lot for your notice !

Here's my been file

What turbo have you got ? part number of my maf is: 1L3F-12B579-AB AFH90-02 2F05 I search on internet and found a guy who told this was the standard reference of his cobra. But to make the car runs correctly, I had to tick the lightning model on the maf choice of nistune. The cars runs good with tha...

It is a cobra lightning model 90mm inside.

What is you engine setup ? car? parts?

OK, Sebastien "Morov" came yesterday for mapping. He started a new map starting again from 0. From the "ER34 RB25DET AA502 MT" bin file. And problem was over. But I don't where I went wrong on my file. I will try to check. So now the car pushes hard from 4 to 7500. We estimate th...

Sorry, I didn't catch your sentence :
experienced same issue about to post on my thread aswell he suggested the tables to adjust read mine

Who is : "he" ?
What is : "adjust read mine" ?

Did you find a solution? Where to find your topic?

Hi from France ! I experience a fuel cut at 6000 or 6500rpm (depending on the weather) each time I'm WOT. It doesn't cut when I'm 50% throttle. Second problem is that I must unhook the MAP sensor to make the car run smooth when pushing the throttle. If i let it hooked, when I push the throttle, the ...

Have you solved your problems? It seem I'm expieriencing the same problem since I passed my RB30 with a GTX3582 turbo instead of my GTX3071 before. It cut at 4.66V on my Z32 maf and it is a fuel cut. My map sensor is unhooked because if i connect it the engine has eratic working when i press the ped...