Thanks Matt.
Typo on resolution 2 heading, should be disconnect MAP sensor.
Search found 13 matches
- Thu Aug 28, 2014 9:42 am
- Forum: General Nistune Discussion
- Topic: NEO Tuning notes (Applies to R34/Stagea)
- Replies: 7
- Views: 14291
- Wed Jul 09, 2014 8:00 pm
- Forum: Type 1
- Topic: mystery injectors.
- Replies: 3
- Views: 2535
Re: mystery injectors.
Get them cleaned and flowed. You should do that anyway for secondhand injectors.
The latency can be figured out when tuning.
The latency can be figured out when tuning.
- Mon Jun 30, 2014 8:10 am
- Forum: Innovate
- Topic: MTX-L AFR reading in nistune different from the gauge ?
- Replies: 3
- Views: 6408
Re: MTX-L AFR reading in nistune different from the gauge ?
I wouldn't be apprised of the lookup tables used in nistune don't scale that high. It's not like your car would ruin at that afr. The important thing is that out is the same at the afr you are tuning at. You can view the table used by nistune, can't remember the exact directory but it will be in a f...
- Fri Jun 13, 2014 5:52 pm
- Forum: Type 3/4/5
- Topic: TP not getting read with engine running?
- Replies: 6
- Views: 7952
Re: TP not getting read with engine running?
If you are on the latest beta version you need to tick b fuel schedule when connecting with Nistune.
It's not the maf
It's not the maf
- Fri Jun 06, 2014 1:32 pm
- Forum: General Nistune Discussion
- Topic: LS2/LS7 coils and DWELL Time
- Replies: 89
- Views: 272187
Re: LS2/LS7 coils and DWELL Time
Yes the code is normal.
There should be an option to disable it in the dtc flag section I think (not sure on your particular ecu, there is for stagea)
There should be an option to disable it in the dtc flag section I think (not sure on your particular ecu, there is for stagea)
- Thu Jun 05, 2014 3:45 pm
- Forum: Type 2
- Topic: rb25det s2 z32ecu tune
- Replies: 2
- Views: 3009
Re: rb25det s2 z32ecu tune
Read the guides and go from there.
If you are going to be tuning you need to understand what is happening.
If you are going to be tuning you need to understand what is happening.
- Wed May 28, 2014 8:16 am
- Forum: Software Bugs
- Topic: TP Bug in version 1.2.4
- Replies: 7
- Views: 4187
Re: TP Bug in version 1.2.4
I have contacted Matt regarding this, you need to enable Bfuel schedule when consult connects.
It has also been upgraded to show tp during stream mode.
It has also been upgraded to show tp during stream mode.
- Tue May 27, 2014 7:24 pm
- Forum: General Nistune Discussion
- Topic: LS2/LS7 coils and DWELL Time
- Replies: 89
- Views: 272187
Re: LS2/LS7 coils and DWELL Time
The Coils to get are: C1512 D514A OEM part 12573190 These are all part numbers for the same denso coil. Lots of testing has been done on all the variants and this one does not false fire (effectively uncontrolled added advance) at higher dwell levels like the others. There are plenty of documented ...
- Sat May 24, 2014 12:05 pm
- Forum: Type 1
- Topic: Super lean issue
- Replies: 6
- Views: 3649
Re: Super lean issue
Check fuel pressure. It's unlikely the existing just stuffed up.
- Mon May 12, 2014 1:29 pm
- Forum: General Nistune Discussion
- Topic: Nistune Formal Release 1.2.21 [update]
- Replies: 88
- Views: 288047
Re: Nistune Formal Release 1.0
That's fantastic news Matt.
I am getting excited!
I am getting excited!
- Thu May 08, 2014 9:43 am
- Forum: Type 3/4/5
- Topic: Fuel cut problems @ 6000rpm R34 GTT RB3025
- Replies: 20
- Views: 8240
Re: Fuel cut problems @ 6000rpm R34 GTT RB3025
Glad you have fixed it Could you post your. bin file for curiosity? I noticed in your first post you mentioned the map sensor was reading 15% at idle and 50% atmospheric, where is it plumbed in? In the stock location it wouldn't read any vacuum as it is in the crossover pipe near the bov. That could...
- Wed May 07, 2014 7:42 am
- Forum: General Nistune Discussion
- Topic: Nistune Formal Release 1.2.21 [update]
- Replies: 88
- Views: 288047
Re: Nistune Formal Release 1.0
nickbucher wrote:Will flex fuel be locked to the zietronix sensor or will it be usable (with calibration curves like afm) with cheaper sensors such as the GM one?
The zeitronix unit uses a gm sensor, it converts the sensors output to 0 to 5 volts. You can't just uses the sensor on its own due to its output.
- Fri May 02, 2014 2:17 pm
- Forum: General Nistune Discussion
- Topic: LS2/LS7 coils and DWELL Time
- Replies: 89
- Views: 272187
Re: LS2/LS7 coils and DWELL Time
The y axis scale is in percent,not milliseconds, so you are not setting a specific dwell time. You increase the original values as per matts post. Otherwise if your method was correct the stock dwell time would be enormous. The dwell time is increased as battery voltage drops to ensure the coils are...