Many many thanks Matt, this helps me a lot.
Regards Martin
Search found 16 matches
- Tue Jun 02, 2020 7:49 pm
- Forum: Type 1
- Topic: Need a stock ROM for a euro CA18DE
- Replies: 20
- Views: 11308
- Wed May 27, 2020 9:45 pm
- Forum: Type 1
- Topic: Need a stock ROM for a euro CA18DE
- Replies: 20
- Views: 11308
Re: Need a stock ROM for a euro CA18DE
I don't need board support for this, i only want to read the original EEPROM to compare the maps with my actual setup.
Many thanks for your help Matt.
Regards
Many thanks for your help Matt.
Regards
- Tue May 26, 2020 7:16 am
- Forum: Type 1
- Topic: Need a stock ROM for a euro CA18DE
- Replies: 20
- Views: 11308
Re: Need a stock ROM for a euro CA18DE
Hello Matt
This is the original bin from my sunny.
But my car is not in the vehicle list.
When i choose the N13 sentra\sunny\pulsar from the vehicle list only the first three maps will not showing right.
ECU part number ist 23710-82A60
Regards
This is the original bin from my sunny.
But my car is not in the vehicle list.
When i choose the N13 sentra\sunny\pulsar from the vehicle list only the first three maps will not showing right.
ECU part number ist 23710-82A60
Regards
- Sat May 16, 2020 9:34 pm
- Forum: Type 1
- Topic: Need a stock ROM for a euro CA18DE
- Replies: 20
- Views: 11308
Re: Need a stock ROM for a euro CA18DE
Hello Matt,
What chip is the right one i should desolder from the CA16DE and the CA18DE ECU?
Thank you
What chip is the right one i should desolder from the CA16DE and the CA18DE ECU?
Thank you
- Wed May 13, 2020 6:39 am
- Forum: Type 1
- Topic: Need a stock ROM for a euro CA18DE
- Replies: 20
- Views: 11308
Re: Need a stock ROM for a euro CA18DE
Is this in the link all i need?
Regards
Regards
- Tue May 12, 2020 7:32 pm
- Forum: Type 1
- Topic: Need a stock ROM for a euro CA18DE
- Replies: 20
- Views: 11308
Re: Need a stock ROM for a euro CA18DE
@bsdkllr
The car runs very good with my maps since 2013, but in the next weeks i take the engine out and put a standard CA18DE in, so i will start with the standard CA18DE maps.
@Matt
If i send you a original CA18DE ECU, can you read the ROM file?
Regards and many thanks
Martin
The car runs very good with my maps since 2013, but in the next weeks i take the engine out and put a standard CA18DE in, so i will start with the standard CA18DE maps.
@Matt
If i send you a original CA18DE ECU, can you read the ROM file?
Regards and many thanks
Martin
- Fri May 08, 2020 5:00 pm
- Forum: Type 1
- Topic: Need a stock ROM for a euro CA18DE
- Replies: 20
- Views: 11308
Re: Need a stock ROM for a euro CA18DE
Still searching for a Stock CA18DE Rom, the ca18de maps in the rom package make no sense to me.
Regards Martin
Regards Martin
- Sun Apr 30, 2017 7:01 pm
- Forum: Type 1
- Topic: Tuned ROM images here!
- Replies: 62
- Views: 115479
Re: Tuned ROM images here!
Car: Nissan Sunny B12 Coupe Engine: CA18DE ECU: CA18DET Also from CA18DET: Intake manifold, injectors, throttle body and sensor, fuel pump. from CA16DE: shorter Gearbox, lighter clutch, lighter flywheel, full exhaust system, replacement catalytic converter 400 cells power steering removed No knocks,...
- Tue Jun 18, 2013 6:19 pm
- Forum: Type 1
- Topic: Need a stock ROM for a euro CA18DE
- Replies: 20
- Views: 11308
Re: Need a stock ROM for a euro CA18DE
Yes i have a Toyota SC12 supercharger, but this is my project for winter
Now i would drive NA.
I have found the thread to rescale the TP load
Now i would drive NA.
I have found the thread to rescale the TP load
- Tue Jun 18, 2013 8:53 am
- Forum: Type 1
- Topic: Need a stock ROM for a euro CA18DE
- Replies: 20
- Views: 11308
Re: Need a stock ROM for a euro CA18DE
How can i rescale the TP?
On idle the TPS shows 0.45V and on full throttle more than 4.0V
On idle the TPS shows 0.45V and on full throttle more than 4.0V
- Mon Jun 17, 2013 10:00 pm
- Forum: Type 1
- Topic: Need a stock ROM for a euro CA18DE
- Replies: 20
- Views: 11308
Re: Need a stock ROM for a euro CA18DE
Hello The Rom i need is not in the Rompack :( And i have no Consult in my 1986 Sunny. My problem: I drive the Sunny (Sentra) B12 CA18DE with a 200SX (180SX) RS13 CA18DET ECU. Then i change the injectors, fuel pump, fpr and maf to CA18DET. I put in the fuel and timing maps from the N13 CA18DE from th...
- Mon Jun 17, 2013 1:51 am
- Forum: Type 1
- Topic: Need a stock ROM for a euro CA18DE
- Replies: 20
- Views: 11308
Need a stock ROM for a euro CA18DE
Have anyone a stock ROM for a euro CA18DE from the Nissan Sunny, Sentra, Pulsar?
- Thu May 09, 2013 11:29 pm
- Forum: Type 1
- Topic: CA18DET ECU with CA18DE engine
- Replies: 7
- Views: 7059
Re: CA18DET ECU with CA18DE engine
The AFR was between 16 and 18 when the car was shaking.
Now i change the k constant from 183 to 260.
Now it runs between 13 and 15.
How can i save this to the ecu?
Burn or upload?
Here was a log file from my run today.
The engine always go off when i use the clutch.
Now i change the k constant from 183 to 260.
Now it runs between 13 and 15.
How can i save this to the ecu?
Burn or upload?
Here was a log file from my run today.
The engine always go off when i use the clutch.
- Sat Apr 27, 2013 3:56 am
- Forum: Type 1
- Topic: CA18DET ECU with CA18DE engine
- Replies: 7
- Views: 7059
Re: CA18DET ECU with CA18DE engine
It runs very good with low rpm, but when i accelerate the hole car was shaking on 2500rpm.
Is it possible that i run in the knock maps?
But there is no knocking at the knock counter.
Is it possible that i run in the knock maps?
But there is no knocking at the knock counter.
- Thu Apr 25, 2013 2:45 am
- Forum: Type 1
- Topic: CA18DET ECU with CA18DE engine
- Replies: 7
- Views: 7059
Re: CA18DET ECU with CA18DE engine
The maf is from a CA18DE but it has the same part number as the CA18DET one.
No there is no turbo, its only NA.
I have also the fuel rail, pressure regulator, intake manifold, throttle body and the fuel pump of a CA18DET in it.
It runs very good on idle with the original CA18DET maps.
No there is no turbo, its only NA.
I have also the fuel rail, pressure regulator, intake manifold, throttle body and the fuel pump of a CA18DET in it.
It runs very good on idle with the original CA18DET maps.