Nistune Forums

Thanks mate

Please Matt can you code a launch control for n15 pulsar

Hey guys, anyone know what values need to be tweaked for pops and bangs on decel?

Also tried these settings, and the max I can rev is 3000rpm

Yes it does stop flashing and nistune is reporting a speed signal. I still can't rev it any higher. I also copied the settings in this video and still got the same result. https://youtu.be/im5to9u0n6Y

https://youtu.be/kGb3hcTgysE

Hey matt! I played around with all rpm settings and this is the max I can rev it, also the check engine light is flashing all the time.

Cheers matt

G'day matt, I have a N14 ECU and a nistune board with N14_SR20DE_68C0F_MT_MT_FP_maps installed on it. Just need to know how do you enable the launch control? I played around with these settings and nothing happens, also is the launch control partial throttle activated or does it have to be wide open...

G'day matt, any updates on launch control for n15 sr20de pulsar ?

https://youtu.be/yTA2bEeLKb0

All fixed. =)

Thanks matt will do, I'm running BKR6E plugs gapped to 0.88... so if the above doesn't resolve the issue, I'll be gapping them down to 0.7

took it for a spin, it is lagging \ missing when coming onto boost before 4000rpm, I'll play around with the injector latency, see if it fixes the issue

Thanks matt, idle seems fine, yet to take it for a spin.

http://oi68.tinypic.com/2zp6s13.jpg yay car fired up. all working. E85 in. would anyone happen to know the correct latency for these injectors? I entered 0.62ms they worked, and also I changed it to 0.72ms and worked ok aswell. quite smokey. but air fuel ratio is OK! (probably cause I haven't drive...

Ok, quick update, I fitted the 370cc's back in and fired right up. Now, after confirming the motor is still OK, I went ahead and installed the 555cc's back into the rail making sure 100% I did not pinch any O-rings. I primed the fuel pump and it is holding 30+ PSI, checked inside the cylinders. And ...