Nistune Forums

Type 1 board with S12_CA18ET_33F01 ROM loaded. Car is now fitted with S14 MAF and 370cc injectors. When I go to resize injectors, old = 270cc, new = 370cc the car won't run? Confirmed injector sizes etc and found that if I enter old 370cc and new = 270cc the K value is correct and the car will run. ...

I have a CA18ET ECU, 23710-33F11, with a bad install so I've eventually sourced another ECU. This ECU has two ROMS, will I need a different Base image on the nistune board or will the ROM 33F01 work without modification? Thanks in anticipation

O.K. Matt, thanks for the help, I've done as suggested and tested the car with an original ECU and the fuel pump ran constantly. I looked into why and found that I've made a mistake when fitting the uprated fuel pump ( I crossed the negative controlled by the ECU and the negative ground / chassis ea...

I have a spare ECU, so I could have a socket put in that and swap over my Nistune board as a relatively quick way of getting back on the road? But at the moment I'm not sure if it's an install problem or a programming issue? I've run the DLPtest program and it connects to the Nistune board o.k. I've...

Communication at the moment is none existent, yes, even when the car isn't running. The fuel pump stays on all the time the ignition is on so is a re-flash something that can be done even though no comms can be established? The install looks o.k. and has been running for a few months so the corrupti...

Hi, new to the forum so please go easy on me if I'm missing the obvious. I'm working my way through the support notes for type 1 board install and consult issues and can't find the files suggested to test communication outside of the Nistune package. In case I'm barking up the wrong tree I'll try to...