Nistune Forums

So I connect the consult again and this time I had RPM as an option along with other functions that were not there last time. On another issue, how do you change the Fuel map to represent the "AFR". IS that the Ctrl F?

Well I had this issue last time I tuned my car but I got away by using the Dyno to get the AFR/RPM. That was about 6-8 months ago. This was a run I did when my tune was way out of wack before I took it down to get tuned by someone who has used the Nistune program before. You can see in the options I...

Hey everyone. Having an issue where when I try to log I have no RPM option in the Consult log box. I'm able to pull up my Wideband for recording, but no RPM. Any solution for this? What am I doing wrong? Oh and I tried to search yet I can not search for ANYTHING. It gives me the same message no matt...

Well I tired to upload a new file starting from scratch. Selected to pick a vehicle , changed the maf and injectors. I noticed the Estimated A/f Rations were all pink and aroiund 9.xx. When I tried to upload to the ECU it says there was no file to upload. Tried to start the car and got nothing.........

Ok I will start from fresh then and see what I can pull off. When you talk about adjusting the K Constant should I be doing this at idle? 2000 RPM?

So I turned the o2 back on by selecting the group of cells and pressing the "O" button again. When I click away from those cells they stay highlighted in a blue tint. However the FTS and FTL still get no readings....... Matt can I start over for a second. I had a tune in the car running a ...

So I tried to adjust the K Constant like you explained to get the right AFR. When I did it I get no readings on the FTS and FTL....... So I can not make sure its close to the 0% mark like you had explained. Does the O2 need to be off when doing this? I did have it off. I was able to get it to a 14.6...

Tickboxes have now been moved to right click menus. I'll need to update the manual for that GUI update Still can not find it through the right click menus, but I did read another thread that the guy found it in "feedback switch 1" on the left side panel. Then I guess by unchecking the O2 ...

Turns out my gauges itself is bad. I have a friend with the same gauge and we hooked his up and it did exactly what it was suppose to do. Now on another note, I'm trying to get the car to get to a good 14.7 at idle. It's really close , bouncing between 14.6-15.1. I'm trying to follow the instruction...

I have used 3 different cables, no luck. Gigaware 2603487- http://www.radioshack.com/product/index.jsp?productId=24192246 Belkin -http://www.frys.com/product/5756282?site=sr:SEARCH:MAIN_RSLT_PG and Micro Connectors - http://www.frys.com/product/5814543?site=sr:SEARCH:MAIN_RSLT_PG. On the Belkin one ...

I called AEM and the only solid advice I received from them is to try another USB to Serial converter. He said that he has seen more not read than can read......

Trying to play with it more and I'm consistently getting no feedback from the wideband gauge. teraterm is not showing any feedback. When I'm in nistune the connect wideband highlights green and when I click it it will open then say can not connect or something of that nature.

Went directly to the Tera Term download and was able to get the program up. Using the Pro 4.xx version. When I try and connect it recognizes the USB / Serial ( Com 5 : USB to Serial Cabel (COM 5). I hit OK and the next thing I do is go to set up/ serial port. Port = COM 5 Baud Rate = 9600 Data = 8 b...

Ok, I made some progress. I was able to understand the configuration and changed the wideband type to AEM Uego AFR. Under the port type there were two, and one was serials to USB which I selected. When I did this and I clicked on the Wideband connect button on the program the screen popped up and re...

This is my first go round with tuning so this is going to be a learning process for me. I'm at the point of trying to connect my AEM uego wideband and I'm completely lost. I was reading through the manual from nistune.com under section 15 "configuring wideband auxillary inputs". Now I have...