Nistune Forums

Are you running a blow through MAF? No reason you should see those voltage levels unless you're push a lot more than 200rwkw.

Maybe I'm misunderstanding, but my car pulled 4.809 volts at 540RWHP on a stock unmodified or rescaled Z31 MAF. Based on several others' results further supporting mine, it looks as though the Z31 MAF will meter up to ~600 HP.

Matt I was wondering why you have a rating of 500HP for the Z32 MAF in NIStune but for the Z31 only 266HP? The Z31 MAF flows more than double that and I think it causes confusion.

I don't remember off the top of my head but enjoyrth no longer holds the most power in the stock AFM. I made 545 RWHP and 540 RWTQ through the stock MAF last year.


https://youtu.be/iJa5qr4RIIM

ZIP file. Extract to your Documents\Nistune\Type 1 folder Test release for VL_RB30ET_B490F_MT_FP.ENT Z31_VG30ET_1988_26P0F_MT_SS_FP.ent (can be used in 1986-1989 Z31 ECUs) Also updated the maps for S13 CA18DET (ENT files are unchanged) [Attachment removed] Just noticed you stated this can be used f...

Very exciting updates Matt! I will happily test on my Z31 once available.

I would very much be interested in a Type 1 package if you're able to finalize a product Stu. Hope all is well.

Jason good to see you here again.

Do you know how long exactly the board remained powered on? I believe mine has similar behavior but the power cuts out after a few seconds. I'll try to check this weekend on mine.

Any chance the feature pack will be release for the Z31?

Looks great with the drop and the FX35 wheels! I though they were the M35 18's at first then seeing how tiny the stock 17's look lol

Matt wrote:Feel free to post to the page or email me the results to add!

I posted in the results section Matt ;P

I liked the NIStune page! You should share my dyno results on the facebook page I have a feeling 545 RWHP in a Z31 on NIStune may raise an eyebrow or two.

I finally got around to dynoing my Z31. I've recently shared my results on Z31 Performance, 300ZXClub, etc. But I feel its necessary I share them here as well. I do believe this is the most power recorded on a Z31 with: Stock bottom end Stock MAF Stock Ignition Coil My current mods are as follows: S...

Well this is a little late for some who may have been interested. I'm going to go ahead and post up one of my older BIN files just for reference. This is was simply a driveable tune on my car after I installed the Schneider 274 cams, PT6262, and StreetFighter manifolds. It was by no means a finished...

Make sure your speedo is working inside Nistune otherwise it will use safety limits Current rpm check is correct in the address file, however I've added the safety limits as well Copy the attached file to your Documents\Nistune\Address folder and overwrite the old one. It has the update for this li...