Nistune Forums

Another video of both ECU and Dash - https://youtu.be/EUcnHWHFwmU

Hey, weird issue, have been looking into it for the past few days, Attached is a video of my check engine light blinking diagnostic codes, Replicating the ECU Red and Green LED, which both flash together the same codes as the check engine light. https://youtu.be/PYaPcDh1DNg Nistune Consult Shows no ...

I'm all good! got it figured out now thanks

Probably stalling due to the MAF being to close to the turbo, MAF is Sensing air when it shouldn't.

I believe I've fixed yesterdays problem with changing the spark plugs. Today I took it out and it seems to be hitting TP load cut, It's highlighted Red anyways, maybe because the KNOCK CODE I didn't notice until now (Any Guidance here on what to do?) I added fuel yesterday ,which is why we are rich ...

I have been getting things sorted, ok and everything is starting to come together. I am facing an issue with the car breaking up down low, if I push through it everything's fine, I've look at the quick log of it happening and cannot pinpoint the issue, before I go replacing parts I'm hoping someone ...

The .bin and the log while vehicle is cold (it was doing it when cold and operating temp), but I found we had grounded the wire you said not too for the z32 MAF way better now only when at operating temp. If you punch the gas while cold it's still goes straight lean, even though 4.xx TPS and MAF inc...

Quick update, it idles worse when unplugged

TY for replying, took the car to a car show this past weekend, just 3 footed it to keep running at idle, but that no longer my main concern right now (could be BOV recirc. issue). If I floor the gas in neutral or try to take off from a stop it won't go anywhere (full lean) until higher RPM it clears...

I've been through tbem, but yea willing to bet it has something to do with my BOV going to atmospherr, is there any way to override this by changing something? Or just change BOV

All good with the feature pack now, I can (should say could) get the car running driving, now it just wants to die at stop signs or just if you rev it, it goes low idle and eventually dies. I have taken off work now and read and read, then try it, I've tried these peoples bin files on here, I've tri...

I sent it to Houston Zauto

I've emailed and called Andy im not giving up hope on him, it's been a day, but if all else fails who is your next Recommendation?

Pretty sure I answered my question the 36f0f is the feature pack. Found it on another post (the one that was running with maf unplugged)
I will email Andy in the morning and get that taken care of thanks

Getting confused you say "Get reflashed with 36F0F (compatible with 36F05)." Do you mean get reflashed with 36f0f which is compatible with 36F11?

Can my old chip be flashed to work with the feature pack stuff?

All these years only thought manual cars had the clutch safety switch haha