Nistune Forums

Ok, Guys, I found the map "TPS Enrichment trigger".

I now need to find the map that controls how much TP is added on light throttle tip in

I need to stop by and help you out with the mapping again.

Where you are leaning out - that part of the map where its happening, what if you richen it up there?

Howdy.

If I richen up the cell, Then at part throttal, Im over rich

Post up a log.

I will try and get you one

Are you using a DE or VE ecu?

Im using a B13 ECU

try adjust the ttpm max to all 255 values.. that fixed my problem.

Thanks gsracer, but this still didnt help

Its really getting bad at mild tip-in

Good Morning Nistune Forum. I need assistance with my SR20VE my car is going lean at part throttle tip in , Hitting up to 17.1 causing bogging before acceleration . I don’t want to use the Accel Increase fuel map as I don’t want the car to access the last Fuel and timing map, I want it to run throug...

Found this for the N1 MAF 65535 62637 59815 57069 54397 51802 49282 46837 44467 42172 39951 37805 35732 33732 31805 29949 28165 26452 24808 23233 21726 20286 18911 17602 16356 15173 14051 12989 11985 11038 10147 9309 8542 7834 7175 6561 5990 5457 4961 4499 4068 3667 3293 2929 2593 2284 2001 1743 150...

HI Guys

Im looking for the VQ Table for the 20VE maf, P12 Sr20VE , The 3.5 inch item.

Anyone got it or is it the same as N15 SR20VE?

Light Weight Rims: ------------------------------ Got my hands on a nice set of light weight rims for the senta in 15inch. http://i1031.photobucket.com/albums/y373/torpor13/DSCN1845.jpg http://i1031.photobucket.com/albums/y373/torpor13/DSCN1846.jpg New Intake: http://gspec.com/xn1/xn101.jpg http://g...

Hi Guys

Nistune Type 3
Greddy Switcher
SR20VE
N1 cams
Exhuast
Header

This was my very old dyno, Hoping for 200Whp once my new parts arrive

95ron
Very high above sea level

Hi guys

I have a 10:1 Comp, C3 cam equipped Sentra. I’m looking for any SR20 a custom tune.

I just going to be using it as a reference.

Thanks guys

Cool...

No other DTC code, I will re-install your new board next week use the new rom-pack Address file and correct the TTP tables and try again to see if the miss returns

actually before i do that... please check a few things. i was doing some more work last night If you disconnect your knock sensor do you still have the problem? What is the resistance in ohms of your knock sensor? Morning Matt... I can’t check the ohm of my detonation sensor because of my custom in...

Cool thanks Matt...

Sounds like a plan..

the fuel map, on your old map, seems to be pretty lean on the top end...
such as the 550cc map...

Are you basing this off the AFR on the map itself or the log files because a stable 11.7 on boost is fine for me, Car pulls stronger and smoother...

But the TTP/Max is what I’m concerned about

Hi Matt I have attached two log file below, I start logging once I start the motor and you will see the Knock registers on the logfile and only go away after I clear them, I have used your Knock monitoring tool, Cell Flagging and alarms and nothing works I the only knock I might get is when the car ...