Search found 8847 matches
- Thu Sep 14, 2023 10:57 am
- Forum: Type 3/4/5
- Topic: S14 SR20DE Coil on plug solution
- Replies: 0
- Views: 162805
S14 SR20DE Coil on plug solution
S14 SR20DE Coil on plug using SR20DET ECU information attached From customer Bram: I've managed to get my car running on the type 4 board and a JDM det ecu, I've attached how so maybe it can help someone else if they ask you. No need to swap out the loom, just the trigger and home signals are revers...
- Thu Sep 14, 2023 10:55 am
- Forum: Type 3/4/5
- Topic: MAF issue 5v @ ignition
- Replies: 2
- Views: 7643
Re: MAF issue 5v @ ignition
Check the voltage reported on the MAF channel in the software. See what that says. It should match the shielded signal wire against the ground wire at the MAF sensor
- Thu Sep 14, 2023 10:07 am
- Forum: General Nistune Discussion
- Topic: Forum images gone?
- Replies: 5
- Views: 89914
Re: Forum images gone?
I've noticed this and will have to go through the forum upgrades and movement to the new server and fix this up
- Sun Aug 20, 2023 12:10 pm
- Forum: 14Point7
- Topic: Support of Spartan3/Lite
- Replies: 1
- Views: 15114
Re: Support of Spartan3/Lite
I have no plans to add any more wideband units. If it outputs AFR as 0-5V signal then you can input and convert that on the AUX channels to a custom AFR channel
- Sun Aug 20, 2023 12:09 pm
- Forum: General Nistune Discussion
- Topic: Counterfeit Z32 MAF sensors (pics)
- Replies: 31
- Views: 109169
Re: Counterfeit Z32 MAF sensors (pics)
Units (including ECUs) manufactured by Bosch generally do not have the Nissan logo. So we have seen genuine units without the logo. Maybe it has been 'repurposed' as duplicating the ceramic boards would be very difficult
- Tue Aug 15, 2023 11:08 pm
- Forum: Type 2
- Topic: Throttle enrichment and Wall Flow tables
- Replies: 4
- Views: 16258
Re: Throttle enrichment and Wall Flow tables
You may have to adjust the user mode (File > Config > Misc) to expert to see those tables However normally you should not need to mess with those. Ensure that normal idle and cruise mixtures are correct, and on boost that they also look right before tacking acceleration issues Perhaps post some logs...
- Tue Aug 01, 2023 11:30 pm
- Forum: Innovate
- Topic: Innovate LC-2 - Is It Compatible?
- Replies: 1
- Views: 13111
Re: Innovate LC-2 - Is It Compatible?
Missed this post but all innovate units use MTS. So they are all compatible, including LC-2
- Thu Jul 06, 2023 7:33 am
- Forum: Type 1
- Topic: Nistune Cannot find USB correct Drivers. ERROR
- Replies: 18
- Views: 43110
- Fri Jun 30, 2023 2:25 pm
- Forum: Type 1
- Topic: Nistune Cannot find USB correct Drivers. ERROR
- Replies: 18
- Views: 43110
Re: Nistune Cannot find USB correct Drivers. ERROR
That is strange. If you have another log of that with the updated tune, can you post here? Going from the prior log we can see that injection time is switching between sequential/batch at the point you might see the issues. I looked into the batch parameters setup between NA and the slightly larger ...
- Sun Jun 25, 2023 1:51 pm
- Forum: Others
- Topic: VEMS wideband
- Replies: 26
- Views: 32664
Re: VEMS wideband
Hi Raddy I got rid of the VEMS a while ago, so will need a debug log from you Can you please post the debug log file File > config > misc > debug logging Then restart, and connect to wideband only (not consult) and let it sit there for about a minute. Then disconnect, close Nistune and email me the ...
- Sun Jun 25, 2023 1:50 pm
- Forum: Type 1
- Topic: Nistune Cannot find USB correct Drivers. ERROR
- Replies: 18
- Views: 43110
Re: Nistune Cannot find USB correct Drivers. ERROR
Log files shows your board is 26P0F (1988 VG30ET ECU) DESC: Z31 (VG30ET) 1988-89 FP1: Flex Fuel + Launch Control : : 26P0F If you are using a nonturbo setup then we will use the K=850 constant and other non turbo maps from the 25P00 (non turbo) base file not the K=607 in the 26P00 turbo base, and le...
- Mon Jun 12, 2023 9:53 pm
- Forum: Forum Announcements
- Topic: Forum Server errors - 500
- Replies: 1
- Views: 17850
Re: Forum Server errors - 500
This is all fixed now with the entire website and forum updated to latest software (and new host)
- Fri Jun 02, 2023 4:31 pm
- Forum: Type 1
- Topic: Nistune Cannot find USB correct Drivers. ERROR
- Replies: 18
- Views: 43110
Re: Nistune Cannot find USB correct Drivers. ERROR
Tricky one. These are different files. You will need to File > Import selected maps and then select fuel, timing, all scales, K Constant and Latency. That will copy into the current turbo file, then upload (and save a copy of this for future use)
- Fri Jun 02, 2023 9:23 am
- Forum: Type 1
- Topic: Nistune Cannot find USB correct Drivers. ERROR
- Replies: 18
- Views: 43110
Re: Nistune Cannot find USB correct Drivers. ERROR
Please use the latest installer: Nistune Version 1.4.3 (EXE) 1 Apr 2023
FTDI renamed dpinst_amd64.exe to dpinst-amd64.exe in their latest update, so we had to fix this in the installer to match
FTDI renamed dpinst_amd64.exe to dpinst-amd64.exe in their latest update, so we had to fix this in the installer to match
- Tue May 23, 2023 7:36 am
- Forum: FAQs
- Topic: How to disable software deactivation
- Replies: 3
- Views: 15458
Re: How to disable software deactivation
If it is any help, the latest version of Nistune still supports Windows XP (!)
We updated the installer, and then got complaints from some customers, so ended up using the latest XP compatible installer since the rest of the software still supports it. With Win7 that will not be a problem
We updated the installer, and then got complaints from some customers, so ended up using the latest XP compatible installer since the rest of the software still supports it. With Win7 that will not be a problem