Trouble connecting to LC-1

[msaunders]

Hi all,
Just got Nistune and the WB02 installed and am trying to configure everything for the first time.
For some reason I'm unable to get the LC-1 to show up in Nistune. Logworks and LM Programmer work and I can program both units via usb/serial adapter (in my case com7). I believe I have Nistune correctly configured with com7 and the Innovate lookup tables referenced but when I hit connect it says device not found. Any ideas?
Thanks

edit - had conflicting com ports setup on my machine, oops!

Can connect and get proper AFR in Logworks, but it just reads 32afr in Nistune

[Matt]

Run through config again in Nistune

Reselect Innovate MTS in the drop down, resleect correct COM port
Check wideband folder is MTS

If that doesnt work, select something else (different unit) and then OK and then open up config again and do MTS

If that doesnt work let me know

[msaunders]

Got it sorted, thanks Matt

[Matt]

Okay was reselecting the fix then?