More updates tonight
- Logging functionality improved. Fixes for stopping/starting log files whilst consult was recoding, or pressing consult activate turing logging playback
- Consult 'logging mode' updated to include all registers in the streaming
- Consult RAM trace window speeded up (16 x increase for extended consult currently only tested I will try standard nissan consult RAM trace soon)
- Various improvements with consult code / extended consult implementation and better error reporting
- Now works with Zexel Diesel ECUs (Consult II) like Patrol and H8 based Skyline ECUs
* AFR tracing will only function if a fuel window is open. This will be worked on in the future but is a bit tricky since it uses the parameters from an open fuel window for the tracing
NIStune 0.90108
Moderator: Matt
- Added the EUGO AFR sensor to the configuration list
- Fixed up logger crash on nistune shutdown
- Working on the consult multi guages window. Kinda working still need to fix up scaling
- Also looking into RAM addresses for knock detection values from the knock sensor board. We are trying to do a knock alert display and also indicate which fuel/ignition map is currently in use
- Fixed up logger crash on nistune shutdown
- Working on the consult multi guages window. Kinda working still need to fix up scaling
- Also looking into RAM addresses for knock detection values from the knock sensor board. We are trying to do a knock alert display and also indicate which fuel/ignition map is currently in use
hey peter
yes they have. as we are starting to release boards now, we are giving people the address files relevant to the board being purchased for individual persons. currently only Type 1 / 2 boards are being ramped up slowly for release
this reduces the confusion when getting started. most people will normally only use a single address file unless they are a workshop
keep hold of the address files from a older release if you need one for another vehilcle or email me what you need
yes they have. as we are starting to release boards now, we are giving people the address files relevant to the board being purchased for individual persons. currently only Type 1 / 2 boards are being ramped up slowly for release
this reduces the confusion when getting started. most people will normally only use a single address file unless they are a workshop
keep hold of the address files from a older release if you need one for another vehilcle or email me what you need