Nistune 0.9.14.11b Test Release + ROM Image pack 2.2 UPDATE
Moderator: Matt
Nistune 0.9.14.11b Test Release + ROM Image pack 2.2 UPDATE
I'm putting these up today before I do my move over the next two weeks
The test release has the following fixes:
Load max scales overlap when ER34 AFM resize
Fix emulator connectivity issues
Lauch control parameters
VTC RPM fix from 0.9.14.7 bug
Logging issues Z31 missing entries
Log recording name change disconnects consult
Z31 1988/1989 VG30ET only uses different O2 sensor register (07 instead of 05)
S13 CA18 map tracing issue (VQ map)
Crash when changing VQ map sometimes
LHS Map display resizeable (height)
Remove unused hioctane and load switches to avoid confusion
Addding AFR RHS for Innovate to allow DLP
Different buttons
Map sync button clarification
The ROM pack has additional image files that have been downloaded from ECUs over the last 12 months
As usual let me know any immediate issues with this
The test release has the following fixes:
Load max scales overlap when ER34 AFM resize
Fix emulator connectivity issues
Lauch control parameters
VTC RPM fix from 0.9.14.7 bug
Logging issues Z31 missing entries
Log recording name change disconnects consult
Z31 1988/1989 VG30ET only uses different O2 sensor register (07 instead of 05)
S13 CA18 map tracing issue (VQ map)
Crash when changing VQ map sometimes
LHS Map display resizeable (height)
Remove unused hioctane and load switches to avoid confusion
Addding AFR RHS for Innovate to allow DLP
Different buttons
Map sync button clarification
The ROM pack has additional image files that have been downloaded from ECUs over the last 12 months
As usual let me know any immediate issues with this
Re: Nistune 0.9.14.9b Test Release + ROM Image pack 2.2
Nice Matt!
Do we have to uninstall the previous rom pack and install this one or can we install this one "above" the previous one, like we do in new nistune releases?
Oh... just detected an issue... on the downloads page, the rom pack 2.2 has the same link and file name as the the 2.1...
Do we have to uninstall the previous rom pack and install this one or can we install this one "above" the previous one, like we do in new nistune releases?
Oh... just detected an issue... on the downloads page, the rom pack 2.2 has the same link and file name as the the 2.1...
Re: Nistune 0.9.14.9b Test Release + ROM Image pack 2.2
uuugh. doesnt help if i dont update the link! okay I've fixed that now
Re: Nistune 0.9.14.9b Test Release + ROM Image pack 2.2
just downloaded both matt
found a problem already
using s14 sr20det adr
latest version seems to have wiped the increase fuel table to 255 across on my map
everything else seems ok, not connected to car yet
switched back to 14.2 and the increase fuel table shows normally
found a problem already
using s14 sr20det adr
latest version seems to have wiped the increase fuel table to 255 across on my map
everything else seems ok, not connected to car yet
switched back to 14.2 and the increase fuel table shows normally
Re: Nistune 0.9.14.9b Test Release + ROM Image pack 2.2
I believe this is correct now
0x7C6C: ldm #0xE100,0x3062 #HIGH_FUEL (copy to map register)
0x7C71: bbc #0x0080,0x30AF,0x7C7C (check knock flag)
0x7C77: ldm #0xEE00,0x3062 #REG FUEL (or copy this one if knock flag set)
0x7C7C: ldm #0xE0E0,0x3064 #TP_SCALE_FUEL (copy x temp register)
0x7C81: ldm #0xE0F0,0x3066 #RPM_SCALE_FUEL (copy y temp register)
0x7C86: lda ax,0x30D9 (RPM_CPY to index temp register)
0x7C89: sta ax, 0x306A
0x7C8C: sem
0x7C8D: bbc #0x10,0xE039,0x7CAA
0x7C92: lda al,0x30DC ; rpm_copy_div
0x7C95: ldx #0xE200 #ACCEL_ENRICH
0x7C98: jsr 0xAC61 INDEX_BASED_LOOKUP_TABLE (check if use max TP)
And at the location of E200 is the blank table you see
0000E200 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................
Previous table ADD_FUEL was E230 which is now instead THROTTLE_ENRICH
You will see 'Throttle vs Coolant temp enrich' has this table instead
0x46DC: ldx #0xE230
0x46DF: jsr 0xAC61 INDEX_BASED_LOOKUP_TABLE
0x46E2: sta al, 0x312E
Used in the code prior to determining from injection time the minimum and maximum limits
0x7C6C: ldm #0xE100,0x3062 #HIGH_FUEL (copy to map register)
0x7C71: bbc #0x0080,0x30AF,0x7C7C (check knock flag)
0x7C77: ldm #0xEE00,0x3062 #REG FUEL (or copy this one if knock flag set)
0x7C7C: ldm #0xE0E0,0x3064 #TP_SCALE_FUEL (copy x temp register)
0x7C81: ldm #0xE0F0,0x3066 #RPM_SCALE_FUEL (copy y temp register)
0x7C86: lda ax,0x30D9 (RPM_CPY to index temp register)
0x7C89: sta ax, 0x306A
0x7C8C: sem
0x7C8D: bbc #0x10,0xE039,0x7CAA
0x7C92: lda al,0x30DC ; rpm_copy_div
0x7C95: ldx #0xE200 #ACCEL_ENRICH
0x7C98: jsr 0xAC61 INDEX_BASED_LOOKUP_TABLE (check if use max TP)
And at the location of E200 is the blank table you see
0000E200 FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF ................
Previous table ADD_FUEL was E230 which is now instead THROTTLE_ENRICH
You will see 'Throttle vs Coolant temp enrich' has this table instead
0x46DC: ldx #0xE230
0x46DF: jsr 0xAC61 INDEX_BASED_LOOKUP_TABLE
0x46E2: sta al, 0x312E
Used in the code prior to determining from injection time the minimum and maximum limits
Re: Nistune 0.9.14.9b Test Release + ROM Image pack 2.2
ok cool see what you mean now
Re: Nistune 0.9.14.9b Test Release + ROM Image pack 2.2
not sure i do ,so is everything ok with new version it wont suddenly drink fuel like a muscle car
Re: Nistune 0.9.14.9b Test Release + ROM Image pack 2.2
In short
"Add fuel" table moved to "Throttle Enrich"
"Add fuel" is now a table based which sets TP(load) to maximum when TPS= voltage in table. Like an acceleration pump
"Add fuel" table moved to "Throttle Enrich"
"Add fuel" is now a table based which sets TP(load) to maximum when TPS= voltage in table. Like an acceleration pump
Re: Nistune 0.9.14.9b Test Release + ROM Image pack 2.2
so with this....will launch control work with my typ3 4 RT board?
Re: Nistune 0.9.14.9b Test Release + ROM Image pack 2.2
Ah, i see said the blind man , got it now ,thanksMatt wrote:In short
"Add fuel" table moved to "Throttle Enrich"
"Add fuel" is now a table based which sets TP(load) to maximum when TPS= voltage in table. Like an acceleration pump
Re: Nistune 0.9.14.9b Test Release + ROM Image pack 2.2
as long as the board has the correct firware for the lauch control, it works...enohand wrote:so with this....will launch control work with my typ3 4 RT board?
that is, if I'm not mistaken of course...
Re: Nistune 0.9.14.9b Test Release + ROM Image pack 2.2
Yes the address file support will work for LC boards .... IF you have had the board programmed up for this feature
Re: Nistune 0.9.14.9b Test Release + ROM Image pack 2.2
is this something i should hve requested or something that would have already been loaded when AutoVauhn did my ecu (about 1-2 months ago)
this feature (launch control) & the ability to mask my flywheel CEL (show up as lack of cog, or misfire, due to running a FW with a different tooth count, its a error that gets tripped by the Crank Position Sensor) are 2 features that i would LOVE to have.....
to bad JWT & Tuner-code, aren't sharing much info...
as of right now do you have the ability to EGR delete & rear 02 delete? i think we spoke about this & you said JWT wouldn't share how they did it
this feature (launch control) & the ability to mask my flywheel CEL (show up as lack of cog, or misfire, due to running a FW with a different tooth count, its a error that gets tripped by the Crank Position Sensor) are 2 features that i would LOVE to have.....
to bad JWT & Tuner-code, aren't sharing much info...
as of right now do you have the ability to EGR delete & rear 02 delete? i think we spoke about this & you said JWT wouldn't share how they did it
Re: Nistune 0.9.14.9b Test Release + ROM Image pack 2.2
We provide standard Nissan ROM files. Anything extra has to be available already and then specially requested when programming
I would like to have a tunercode version when both myself and dave are willing and able to work on something
I would like to have a tunercode version when both myself and dave are willing and able to work on something
-
- Posts: 26
- Joined: Sat Aug 16, 2008 6:43 am
Re: Nistune 0.9.14.9b Test Release + ROM Image pack 2.2
Will the launch control work with a type one board? J30 Vg30e maxima. If so what do I have to do to make my ecu work with it?