Longer Bosch sensors for LC1

Anything related to the Innovate brand of wideband devices.

Moderator: Matt

Post Reply
ConVerTT
 

Posts: 15
Joined: Mon Jun 16, 2008 7:31 am
Location: Calgary, Canada

Longer Bosch sensors for LC1

Post by ConVerTT »

If you are tired if using or lengthening the short Bosch sensors that come with the LC1, you can use the Bosch 17085 (42.1 inches) or the Bosch 17090 (46.5 inches) as a substitute.
I asked Innovate directly about this and they incorrectly told me that there was not a longer substitute. Further research proved their claim to be false. I am running a pair of the 17090s in my car as we speak.

The keystone is that any sensor from the LSU 4.2 family with the correct connector will work.

Hope this helps somebody
STATUS
 

Posts: 119
Joined: Thu Jun 12, 2008 10:30 pm
Location: Melbourne
Contact:

Re: Longer Bosch sensors for LC1

Post by STATUS »

ConVerTT wrote:If you are tired if using or lengthening the short Bosch sensors that come with the LC1, you can use the Bosch 17085 (42.1 inches) or the Bosch 17090 (46.5 inches) as a substitute.
I asked Innovate directly about this and they incorrectly told me that there was not a longer substitute. Further research proved their claim to be false. I am running a pair of the 17090s in my car as we speak.

The keystone is that any sensor from the LSU 4.2 family with the correct connector will work.

Hope this helps somebody
bet place to source them is here (that ive found)

http://oxygensensor.net/index.php
Post Reply