maps/tables in use highlighting

[nanook]

Just tried this out to see the maps/tables in use highlighting

No change I can see in Ver 0.9.14.19

Is this happening Matt?

[Fordy]

go into configuration and in the miscellaneous settings (bottom left) You should see the option - Map highlighting (testing)

Havent tried it on my car yet but i'm guessing you need to click it to enable it

[nanook]

Ok thanks

I tried that, it has 2 obvious errors I can see

1) it highlights the knock fuel map when the main map is active ie: changes to main map only affect current afr's

2) no timing map is highlighted at all.

[nanook]

Matt has the cel light coming on when switching to knock maps been implemented for hcr32?

[Matt]

Yes it has been implemented for all of them but I need feedback. Its been disabled by default on purpose so it doesnt confuse anyone yet

I cannot (easily) test knock on the bench. If some are backwards then I will need to check and reverse logic flags

Okay we will start with HCR32 so the knock fuel map is backwards and no timing map (you are using 04U12 yes?)

[nanook]

yep 04u12 hcr32

cool matt

so if ecu switches to knock maps light in dash should show?

[Matt]

It should look like the attached pics. My bench is behaving properly tonight HCR32 is not showing knock faults now until the sensor is disconnected. I'll do another upload tonight. Going to test several other ECUs firstly like SR20 to see what the map switching does on those

[Matt]

just noticed bug in the scales there also after posting that. fixing

[nanook]

Its working perfectly now as far as I can tell.

Great work Matt!