not shure this is a bug.
i opened the nistune i changed the speed limit to 5 km/h , and i could run my car even with 30-40 km/h with no problem (changed it hited apply button if is any..)
any ideas about how can i set a speed limit?
PS: rev limiter worked
CA18DET speed limit
Moderator: Matt
CA18DET speed limit
* Got CA18DET Love
i'll try again but i do not belive this is the problem , because the value that i see in nistune si not the value that the nistune uploads to ecu, i belive the software divide my value with 2 5/2 = 2.5 and rounded means 2 in uploaded to ecu, so speed limiter is 4 even if i set 5.....
anyway i'll try with an even number to be shure of that
anyway i'll try with an even number to be shure of that
* Got CA18DET Love
It's not a Nistune bug, but a Nissan bug
Speed limit in CA18DET isn't really read as we can do it in the prog.
You can put whatever you want for the limit, it won't affect at all
The only way I found is to shoot it completely, I can't modify it.
It's easyer with MEC-D022 base (MEC-D009 doesn't seems to work).
Speed limit in CA18DET isn't really read as we can do it in the prog.
You can put whatever you want for the limit, it won't affect at all
The only way I found is to shoot it completely, I can't modify it.
It's easyer with MEC-D022 base (MEC-D009 doesn't seems to work).
200SX RS13 Zenki (w. CA18DET)
280hp & 330Nm @ 16PSI (GT25R)
Nistune type 1 rev3a
280hp & 330Nm @ 16PSI (GT25R)
Nistune type 1 rev3a