boards have arrived

If it isnt a problem or a suggestion it probably goes here.

Moderator: Matt

Post Reply
Fusion Ed
 

Posts: 281
Joined: Fri May 04, 2007 4:13 am
Location: Chertsey Surrey
Contact:

boards have arrived

Post by Fusion Ed »

Matt, My boards arrived today, thanks. I hope to have one in a car by the end of the week to see how they do.

Another question, now much more of ma09 rom has been learnt, would the type 1 board now be compatible with this ecu for consult and live remapping?

Cheers,

Ed
Matt
Site Admin
 

Posts: 8993
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Post by Matt »

I still have to run through all the consult addresses now for this... but yes it is compatible with the Type 1 boards based on the photos and ROM disassembly

Once I have consult addresses worked out can then program that into a firmware file and put into a board

Still a bit of work to do on this. I've been interstate this week so catching up on emails/forum postings will have to be next week
Fusion Ed
 

Posts: 281
Joined: Fri May 04, 2007 4:13 am
Location: Chertsey Surrey
Contact:

Post by Fusion Ed »

Cheers for the update. Thats fine :)
Matt
Site Admin
 

Posts: 8993
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Post by Matt »

Is this all working now?
Fusion Ed
 

Posts: 281
Joined: Fri May 04, 2007 4:13 am
Location: Chertsey Surrey
Contact:

Post by Fusion Ed »

I tried a second board in another ecu. That worked fine. I ahve not tried the first board in the second ecu to see weather its the ecu or board, however I suspect its just the ECU.

Ed
Matt
Site Admin
 

Posts: 8993
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Post by Matt »

make sure the ECU has all 2x20 pins installed in it. missing pins like used on earlier PLMS boards will stop NIStune boards working
Fusion Ed
 

Posts: 281
Joined: Fri May 04, 2007 4:13 am
Location: Chertsey Surrey
Contact:

Post by Fusion Ed »

It has all the pins!! I would have spotted that a mile away :)
Post Reply