Consult Error

Discuss hardware problems here.

Moderator: Matt

Post Reply
nisn
 

Posts: 6
Joined: Wed Feb 28, 2007 6:28 pm
Location: widebay qld

Consult Error

Post by nisn »

keeps cutting off. getting this Error. anyone help???
Attachments
no.JPG
(140.6 KiB) Downloaded 4505 times
Matt
Site Admin
 

Posts: 8993
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Post by Matt »

I think this is more of a software problem

Does this happen when revs increase by any chance? I'm having a look into the new problem with consult disconnecting soon
nisn
 

Posts: 6
Joined: Wed Feb 28, 2007 6:28 pm
Location: widebay qld

Post by nisn »

hey matt, no it kinda happens totally randomly, my last resort was to reformat my laptop. ive done that,seems to be running better, but i lost my rego for software to try it out. cheers steveo.
nisn
 

Posts: 6
Joined: Wed Feb 28, 2007 6:28 pm
Location: widebay qld

nisTUNE

Post by nisn »

ok i got software running again, will try it out in the morning,,cheers
Matt
Site Admin
 

Posts: 8993
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Post by Matt »

You shouldn't need to do something as drastic as that....

What are the frequency of the disconnects that you are experiencing?

If you can enable logging during one of the runs when it disconnects

File - Configuration - Debug Logging

Then email me the log file from c:\Program Files\NIStune\logs

I can have a look at it. I had some problems with consult on an R32 ECU on the bench last week so I think it could be a similar issue
nisn
 

Posts: 6
Joined: Wed Feb 28, 2007 6:28 pm
Location: widebay qld

Post by nisn »

okkies ill do that thanks :)
nisn
 

Posts: 6
Joined: Wed Feb 28, 2007 6:28 pm
Location: widebay qld

Post by nisn »

.. it happens very often now, like every 2-3 seconds, makes it imposible to do anything .. okkies ill do that thanks :) .email sent.
Matt
Site Admin
 

Posts: 8993
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Post by Matt »

from the logs definately looks like errors on the consult line. the received data was corrupted and didn't match the sent data, so it barfed

try connecting in 'logger mode' and see if the guages are glitching. if so then you may have noise on the consult lines causing corruption
Post Reply