i have attached a movie for this bug, the problems are:
1) the player does not record the data from the TE WBo2 2A0 unit
when i hit record buton i receive the message "that no consult or wideband unit is connected" as you can see from the movie the wideband unit is connected
2) i opened the player hited the browse button writed test.csv and hited open button, the file did not exist and the nistune software worned me about this (i thought that if it does not exists it will be created and nistune will record data in it), opened the browse window again, no file was selected, hited open few times then cance button. now the problem is that each time i try to open the player window i receive an error saying that the log file does not exists. (can be seen in movie)
Problems with "Display log player"
Moderator: Matt
Problems with "Display log player"
- Attachments
-
- bug22.rar
- (922.31 KiB) Downloaded 145 times
0.9103 version
i know this is still in developement but i thoght is good to let you know about this problems:
since version 0.91 it seams that the Aux1 2 3 data is not represented ok on the graph
aux1 = boost
is out of graph
aux3 = TPS
is not even present
i know this is still in developement but i thoght is good to let you know about this problems:
since version 0.91 it seams that the Aux1 2 3 data is not represented ok on the graph
aux1 = boost
is out of graph
aux3 = TPS
is not even present
- Attachments
-
- nistune_2007-06-16_1555_37.csv
- (28.59 KiB) Downloaded 144 times
-
- bug_log.jpg
- (46.62 KiB) Downloaded 2445 times
* Got CA18DET Love
downloaded the log last night and did a playback. The guages are okay but the min/max of the graph isn't syncing up
I found I was only graphing 0...max based from the aux1.csv interpolation file. For this exercise i used -2000,0,2000 for the 0-5 volt readings.
Its not getting the negative readings because i've assumed minimum to be 0. So its only picking up 0-2000 at this stage which is why its not seen. I've made one change but still needs a bit more work
I found I was only graphing 0...max based from the aux1.csv interpolation file. For this exercise i used -2000,0,2000 for the 0-5 volt readings.
Its not getting the negative readings because i've assumed minimum to be 0. So its only picking up 0-2000 at this stage which is why its not seen. I've made one change but still needs a bit more work