Please make Nistune raise an requester/message if it can't find the wideband files.
Nistune was not doing any WB logging, it was very unfortunate since I had planned to log some parameters via the MTS chain (Innovate).
(NT showed the channels, but no data)
Back at home I found this in the log, and I believe this is the reason why Nistune would not show any WB data:
If Nistune would have alerted me, I could have fixed this on the spot.
(I am not using these directories)
12:58:19.046 CNIStuneDoc(): Initilising consult
12:58:19.046 ConsultGetActiveSelections()
12:58:19.046 Unable to load C:\Documents and Settings\TUNE\My Documents\Nistune\Wideband\afr1.csv lookup table - empty file
12:58:19.046 Unable to load C:\Documents and Settings\TUNE\My Documents\Nistune\Wideband\afr2.csv lookup table - empty file
12:58:19.046 Unable to load C:\Documents and Settings\TUNE\My Documents\Nistune\Wideband\afr1.csv lookup table - empty file
12:58:19.046 Unable to load C:\Documents and Settings\TUNE\My Documents\Nistune\Wideband\afr2.csv lookup table - empty file
12:58:19.046 Unable to load C:\Documents and Settings\TUNE\My Documents\Nistune\Wideband\aux1.csv lookup table - empty file
12:58:19.062 Unable to load C:\Documents and Settings\TUNE\My Documents\Nistune\Wideband\aux2.csv lookup table - empty file
12:58:19.062 Unable to load C:\Documents and Settings\TUNE\My Documents\Nistune\Wideband\aux3.csv lookup table - empty file
12:58:19.062 Unable to load C:\Documents and Settings\TUNE\My Documents\Nistune\Wideband\aux4.csv lookup table - empty file
12:58:19.062 Unable to load C:\Documents and Settings\TUNE\My Documents\Nistune\Wideband\aux5.csv lookup table - empty file
12:58:19.062 Unable to load C:\Documents and Settings\TUNE\My Documents\Nistune\Wideband\aux6.csv lookup table - empty file:
