Innovate support is gone from nistune?

[meet07]

I just downloaded Nistune and Innovate was not an option under the Wideband type, under Configuration?

[bachig24u]

I just upgraded, and the option tick box for innovate support was there and is in the configurations drop down.

Have you installed innovate logworks 3.x (latest) first? if not, you need to as nistune relies on some of the files from logworks.

[Matt]

You may need to reinstall LogWorks to get the latest DLL working again (Nistune needs LogWorks) and then it will show up if you have ticked 'Innovate' during the install process inside Nistune previously

[meet07]

Both of you where right. Downloaded the Innovate stuff from the cd that came wit my LC-1 and uninstall and re installed Nistune and its under the configuration dropdown menu for wideband types...Thanks guys!

[meet07]

Its telling me to check the power which the wideband works and chec file,configuraion which its showing me that its pluged into com port 6?

Anything else that im missing?

[Matt]

Try it in Innovate LogWorks first and get it working there. After that then try Nistune.

Nistune isnt seeing any data from the cable I'm guessing. If its a LC-1 or similar which uses a USB-serial converter - its seeing your cable but not the data going into it

[meet07]

I got it working Matt but it showing the AFR in lamda? When I log a run it has 2 lc-1 options. I think one is lc-1 and the other is lc-01...new to me b/c I havnt seen this before?

Thanks for your help

[Matt]

To change the wideband display
0.10.13 File > Config > Wideband Lambda (turn off)
0.10.14 Wideband window > Right Click > Lambda