can not find innovate under wide band type

[that guy]

same as above cannot connect and could'nt find innovate under wide band type look up table configured

[bachig24u]

Do you remember if you ticked the box for innovate .. during the installation or upgrade questions inthe install wizard?

must have LOGWORKS 3.07 installed before NIStune.

[Matt]

Next release I've removed the tickbox (always install the LogWorks SDK OCX) however since the DLL needs to be from LogWorks3 to work properly, if it is not detected then you will be notified when selecting 'Innovate MTS' inside File > Configuration

[Matt]

Next release I've removed the tickbox (always install the LogWorks SDK OCX) however since the DLL needs to be from LogWorks3 to work properly, if it is not detected then you will be notified when selecting 'Innovate MTS' inside File > Configuration and prompted to reinstall LogWorks

[Matt]

Note also - Windows Firewall can block 'Innovate MTS' from being available in Nistune. If after reinstalling logworks still not showing then enable Nistune through the firewall (or disable the firewall on private network to see that this is the issue temporarily)