Consult Display

[trevor1986]

I'm not able to view my tps voltage in me consult display. I know when you first start Nistune it gives you a window with several options to select to display, my question is how do you I get to that window or were can I go to make my tps voltage display?

Thanks

[trevor1986]

Anyone please! need to see if my voltage is correct.

[Matt]

Operations > Consult Registers and enable TPS here. If it terminates connection (current version does) then use the 'display on connect' tickbox and reconnect to consult then tick

[trevor1986]

Thanks Matt! Ill try this and let you know if i have any issues.

[trevor1986]

Operations > Consult Registers and enable TPS here. If it terminates connection (current version does) then use the 'display on connect' tickbox and reconnect to consult then tick

Matt when I go under operations there isn't a consult registers.

[trevor1986]

Never mind I got it. Thanks Matt

[bachig24u]

yeah ... probably doesn't need "select" in front of it really.

[Matt]

Well you are 'selecting' the registers to be using? I've still kept that labeling in the newer menu system at the moment