RPM cuts at 4000 on load

[bachig24u]

have you fitted R33 tps to the r34 throttle body?
Wondering how the output voltage is reversed.

[guricha]

have you fitted R33 tps to the r34 throttle body?
Wondering how the output voltage is reversed.

yap, still the same problem:)
Cuts issue was solved, don't know why but i couldn't see before that speed was at 3000 rpm more then 300 km problem was solved cutting speed wire going to ecu Pin number 29

[Matt]

was going to look at your log tonight. so you have it solved now? The speed sensor reading is too high for this ECU and causing a premature load cut condition?

[guricha]

was going to look at your log tonight. so you have it solved now? The speed sensor reading is too high for this ECU and causing a premature load cut condition?

Matt, yes speed reading was about 320 km at 3300 rpm or so so it was cutting the car out, i had no Nistune and what i try to simply cut speed wire at the ecu, please check the log if you will have free time and look at ignition i think some problem still exist, i dont like ignition and tps signal is still reversed
anyway your opinion is important for me as i don't have much experience with r34