Tune I made for KA24DE, Need input

[Gotenks64]

Ok, so these are the components in my motor:
Built Head
Stock Cams
Cosmetic Head Gasket
.020 Over Bore with CP Pistons 9:1
Eagle Rods
Fully balanced rotating assembly
Stock flywheel
Spec Stage 3+ Clutch
ARP'ed Everything
Clevite Bearings
.60 trim turbo at 6 psi

I have stock injectors, Circuit Sports 340lp fuel Pump and Adjustable FPR for the time being. Also running stock MAF; but I have a Q45 MAF for when I need it.

With my TP load being at 96 at WOT is my timing to aggressive for 6 PSI? Any input would help, I haven't load it to the car yet or ran it on this tune.

Also I have 550cc injectors on the way, if anyone has a set up simliar I would love to see the map with 550cc's

[UNISA JECS]

Your timing is the same as stock at 96 TP yes I would take a bunch of timing off and diffenantly upgrade to larger injectors ASAP.