NEED PINK nismo 555cc side feed injectors

[enohand]

ok first off....please dont say that the 555 are yellow,. i know that, but there ARE pink 555 Nismo's also, they were produced a long time ago & the yellows replaced them


I recently purchased 4 of the pink 555 side feeds, & sent them off to be reconditiond, well 1 of the injectors is completly shot & cant be repaired.

SO now im @ a stand still i need 1 injector that is a unicorn in the injector world.,,,,,,i was wondering if any of you guys have any of these injectors or could source them...

Also i know that the STI injectors are about the same size & pink & side feed, but thats not what i have, i have Pink NISMO 555 side feeds....let me know
__________________

please if you have them or can kind them let me know....im in a pinch right now.....i have this same post on the NZprimera forum, NOPC, both sr20 forums & G20.net....my username is the same on all....PLEASE HELP!!!

[enohand]

Bump....


it seems like these are available in Australia....any one have any? i think i can only get these from Europe or Australia.....i only need one (a good one!)


please help....or point me in the direction to other European forums that might help me

[enohand]

Bump....


it seems like these are available in Australia....any one have any? i think i can only get these from Europe or Australia.....i only need one (a good one!)


please help....or point me in the direction to other European forums that might help me

bumping this up again....


i cant seem to finds these injectors ANYWHERE!

[PL]

I've not seen the pink NISMO's you speak of here.

At the risk of making you angry and causing stuff to get smashed - can't you just fit a set of the later yellow 550's? New injectors = reliability and peace of mind. Good exchange rate at present.

PL

[enohand]

nope....i talked to a few injector rebuilders as well as nismo, & the latency ( ithink) is different between the yellows & pink'a

[CoZZm0]

Well you could replace the SET as PL suggested and adjust the latency and problem would be solved really... Obviously good to use what you have, but in reality, if its holding up the build of the car (like for a YEAR...), replacing the set would seem wise and keep them. Never know when you might find one to complete the set then sell it off as cleaned and tested?

eBay has them, but sells a full set. Not sure if you could get just one ?

http://www.ebay.com.au/itm/NISMO-555CC- ... 2eb1e47377

also full set of 6 though (good for spares, make 2 full sets!), but used and cheaper than above.

http://www.ebay.com.au/itm/NISMO-555CC- ... 2c5895150c

[skylinegtrhr]

I really hope that You solved Yours problem already, but I just find these NISMO 555 old style injectors on this site
http://www.z1motorsports.com/product_in ... ts_id=4744

[RomChip200]

Go for phase 2 JECS injectors with adapter kit.
Buy some cheap 270cc in China, shave them and they will flow exactly 550cc @3bars.
I did it.
http://www.aliexpress.com/item/Nissan-I ... 79636.html

They are in the $15-30 price range for each.

270cc Injector shaved nozzle:
Flows 550-570cc in 1 minute at 3 bars (43.5 psi) of fuel (intead of 300cc before)

[enohand]

Go for phase 2 JECS injectors with adapter kit.
Buy some cheap 270cc in China, shave them and they will flow exactly 550cc @3bars.
I did it.
http://www.aliexpress.com/item/Nissan-I ... 79636.html

They are in the $15-30 price range for each.

270cc Injector shaved nozzle:
Flows 550-570cc in 1 minute at 3 bars (43.5 psi) of fuel (intead of 300cc before)

any details on how to shave them/ or a location i can research/?