AEM UEGO Gauge

AndyStuttgart · Post by **AndyStuttgart** » Thu Feb 15, 2007 9:40 am

Hi,

will support for these gauges be added?
TheyÂ´re quite cheap and IÂ´ve got one, thatÂ´s why IÂ´m asking

Link:
http://www.aempower.com/ViewCategory.aspx?CategoryID=67

Cheers,
Andy

Matt · Post by **Matt** » Thu Mar 15, 2007 12:18 pm

the protocol for these is really simple. yes i will add support for these

Matt · Post by **Matt** » Sun Jul 29, 2007 10:32 pm

This has been added. Please confirm it works

AndyStuttgart · Post by **AndyStuttgart** » Wed Aug 22, 2007 4:54 am

Took some time, but finally tried to use it - doesnÂ´t work.
Seems to connect at Port 1, but then thereÂ´s a message like "Wideband not configured" and it just reads 9 permanently...
If I open Com1 with Windows Hyper Terminal, I get correct reading submitted all the time though...

Matt · Post by **Matt** » Wed Aug 22, 2007 11:45 am

When it says 'wideband not configured' this means that the COM port has not been selected from File - Configuration for the unit

So make sure in File - Configuration that
Wideband Type = AEM UEGO
Wideband Com = COM1

Retry the connection and let me know how that goes. If that doesnt work then please shoot me through a debug log (Enable Debug Logging and the log files *.log get put in c:\Program Files\NIStune\logs)

Matt · Post by **Matt** » Mon Aug 27, 2007 1:58 am

Dont worry about that log... I found the problem when I was adding the DLP A/D converter in the wideband code

It is fixed and all tested and confirmed working with my AFR output simulator. Will be available in the next version

AndyStuttgart · Post by **AndyStuttgart** » Mon Aug 27, 2007 2:02 am

Matt wrote: It is fixed and all tested and confirmed working with my AFR output simulator. Will be available in the next version

WhenÂ´s it coming out?

LMQT · Post by **LMQT** » Mon Aug 27, 2007 2:12 am

As I said in another topic, it works for me since june or july (when I bought this UEGO), so I'm surprise

Matt · Post by **Matt** » Mon Aug 27, 2007 2:13 am

Should be in a few days. I want to fix that logging problems where it logs nothing in the file sometimes even though it looks like it is on the screen.

Once thats done and retested a few things it should be good to release version 0.9110

However if my Moates emulator arrives early I might double check the dual ROM emulation functionality and also look into Eds ROM offset problem too. Trying to get a few bugs off my list!

AndyStuttgart · Post by **AndyStuttgart** » Fri Aug 31, 2007 7:50 pm

When do you release 0.9110?
Just got my two Ostrich 2.0 yesterday and would like to start playing around with the car today

Matt · Post by **Matt** » Sat Sep 01, 2007 2:36 am

I dont have good news on the Ostrich front...

I've attached a document which should cover the basics of the protocols for
trace. I have yet to finalize the implementation, but it will be soon via
firmware update.

In other words the firmware doesnt support address tracing yet. I have my Ostrich 2 here also but havent had time to even plug it in yet

I'm visiting a customer tomorrow to tie down an Innovate bug, and once that is fixed along wtih logging will do a release after then.

Fusion Ed · Post by **Fusion Ed** » Sat Sep 01, 2007 8:06 am

Dont fancy adding/fixing the offset odd/even split do you PRETTY PLEASE!

AndyStuttgart · Post by **AndyStuttgart** » Wed Sep 05, 2007 8:07 am

Verified in car and works - thanks

But please change the look, since AEM doesnÂ´t support additional inputs so just AFR would do in the wideband box...

Matt · Post by **Matt** » Wed Sep 05, 2007 11:41 am

I'll add that one as an enhancement. I would have to do new code to redraw and the scale the fonts automatically based on how many sensor inputs there are i that window

Currently they are just drawn manually onto the window using fixed sized boxes