Hi, could this plug fit in GTR35 AFM ?
Thank you !
Plug for GTR35 AFM ?
Moderator: Matt
Plug for GTR35 AFM ?
- Attachments
-
- Nissan Tiida AFM Plug.jpg
- (91.73 KiB) Downloaded 2885 times
-
- Nissan Tiida AFM Plug Front.jpg
- (73.81 KiB) Downloaded 2885 times
Re: Plug for GTR35 AFM ?
It looks like it. 6 pin connector. Do you have a source for those plugs at all? Its the main thing preventing us from using these AFMs
Re: Plug for GTR35 AFM ?
Will ask and let you know !Matt wrote:It looks like it. 6 pin connector. Do you have a source for those plugs at all? Its the main thing preventing us from using these AFMs
Re: Plug for GTR35 AFM ?
Ask the seller for 4 pieces and he got it.
It is used, removed from China made Nissan Tiida.
How many pieces do you want ?
Do you want me to test fitting before ordering, I haven't try fitting on GTR35 AFM ? (order the first time for less quantity, if not fit, less money lost)
I have also found some china made slot type AFM, I,m think to remove the sensor inside and replace with a genuine GTR35 AFM.
Replacement for Parts number 22680-7S000 | 22680-CA000 | 22680-AW400
Will ask the seller to source the housing only.
Also found aluminium tube with slot type flange, will ask the tube ID.
It is used, removed from China made Nissan Tiida.
How many pieces do you want ?
Do you want me to test fitting before ordering, I haven't try fitting on GTR35 AFM ? (order the first time for less quantity, if not fit, less money lost)
I have also found some china made slot type AFM, I,m think to remove the sensor inside and replace with a genuine GTR35 AFM.
Replacement for Parts number 22680-7S000 | 22680-CA000 | 22680-AW400
Will ask the seller to source the housing only.
Also found aluminium tube with slot type flange, will ask the tube ID.
- Attachments
-
- Aluminium tube with slot flange.jpg
- (15.07 KiB) Downloaded 2852 times
-
- China made housing.jpg
- (26.4 KiB) Downloaded 2852 times
Re: Plug for GTR35 AFM ?
Aluminium tube with slot flange, seller replied tube ID is 76mm
I think buying this or the china made plastic housing, plus the Tiida plug, will save a lot of time on frabcating
I think buying this or the china made plastic housing, plus the Tiida plug, will save a lot of time on frabcating
Re: Plug for GTR35 AFM ?
They probably fit but would be best to test. Depends how much they are. I would look at buying about 10 myself since I know people are looking for them
The tube is good also since mine is 74mm ID
viewtopic.php?f=10&t=2428
These ones dont have a flange for the pod filter but most on ebay dont seem to have the Z32 MAF style bolt pattern so no flange is better than a wrong shape one
The tube is good also since mine is 74mm ID
viewtopic.php?f=10&t=2428
These ones dont have a flange for the pod filter but most on ebay dont seem to have the Z32 MAF style bolt pattern so no flange is better than a wrong shape one
Re: Plug for GTR35 AFM ?
Hi Matt, check mail pleaseMatt wrote:They probably fit but would be best to test. Depends how much they are. I would look at buying about 10 myself since I know people are looking for them
The tube is good also since mine is 74mm ID
viewtopic.php?f=10&t=2428
These ones dont have a flange for the pod filter but most on ebay dont seem to have the Z32 MAF style bolt pattern so no flange is better than a wrong shape one
Re: Plug for GTR35 AFM ?
Boys,
Watch out for those cheap welded housings,
some aren't welded perpendicular or the jigs are off centre.
Watch out for those cheap welded housings,
some aren't welded perpendicular or the jigs are off centre.
Re: Plug for GTR35 AFM ?
Thanks for letting me know. That one pictured does look a little off centered