Z31 cold start issues

Nistune topics specific to the 6802 cpu

Moderator: Matt

Post Reply
Timbo_021
 

Posts: 30
Joined: Thu Apr 16, 2009 10:02 pm

Z31 cold start issues

Post by Timbo_021 »

Howdy
Having an issue lately with cold start. The car will start fine and then after a few seconds it leans right off until it dies. It will do this until it gets to about 40 degrees engine temp and then it runs better. The log shows that as the engine starts to lean off from 13afr, nothing changes as in injection time, timing or tp.. Its bizzare.. Heres the log.

You can see I gave it a few tries but the first try is when the engine is stone cold starting.
Attachments
z31311213.bin
(16 KiB) Downloaded 152 times
Matt
Site Admin
 

Posts: 8993
Joined: Sun Jan 29, 2006 1:45 am
Location: Adelaide, Australia
Contact:

Re: Z31 cold start issues

Post by Matt »

There are spikes in your warm up tables which may not help here

When using Z32 MAF on these ECUs the movement of K constant can mess up the warm start. This requires the enrichment coefficient (warm and cold) to be increased

Attached is a pic of the changes I made to my warmup adjustments when using Z32 on my vehicle
Attachments
VLT_Warmup_Enrich.png
Warmup adjustments
(56.69 KiB) Downloaded 1632 times
Timbo_021
 

Posts: 30
Joined: Thu Apr 16, 2009 10:02 pm

Re: Z31 cold start issues

Post by Timbo_021 »

Ahh, I see. Ill make some changes and see how I go tomorrow morning. I managed to get it a little better by changing the latency of the injectors but its still a bit shit. Thanks Matt.

By the way, got that 32gtr ecu sorted too, working nicely now :).
Post Reply