The description in the first paragraph does decribe my issue a little bit. Let me give a breif summary first:
Car ran all 2013 with no problems
Car was stored for winter, battery died, tune was lost
My car was tuned by a professional tuner, i got him to send me the BIN file in order to reload it.
Now the car will start and idle for roughly 5 mins (no heat registers on the stock or aftermarket temp guages so its not heating up that much)
Car dies completely on its own after 5 mins
During this 5 minute span i can rev it up no problem
After it dies the car will not start again and the fuel pump surges, sometime stays on 100%, relay's flicker...
At this point i reload the tune again but essentially im just going in circles
Here lies my problem, the car was tuned 3 years ago and since then the shop is out of business. I ASSUME the hardware is still functioning properly because the car revs and idle completely normal (for 5 mins) and ran normal all last year. I don't have a stock image to load but to be honest the car is far from stock anyways. Im not sure if i can actually load a stock tune.
The car has the following modifications:
CA19DET
444cc, GTR injectors
HKS 256 cams
N62 MAF
The fix on the above picture says load the stock image, i doubt this will work give how modified the motor is now. Correct?
To me it sounds like the file i was given is corrupt but i do not have another file to load nor am i smart enough to start changing values on my own.
Sorry for the novel but i am honestly stuck. Can someone shed some light on this for me or possibly send me a known working BIN file to help me eliminate some more possibilities?
Any help is appreciated