Moates 2.0 is protocol compatible with the romulator, so communicates the same to NIStune
It appears to run the ECU with out the problems of losing data, skipping when changes are made or dropping changes, like I have noticed with the romulator
It is also a smaller unit and runs directly off USB without the worry of requiring ECU power to allow uploads (my romulator requires ECU power when using a USB-Serial converter... because the romulator uses the DTS line to get 5V from the PC but not all converters have this)
It also has a full 64KB of emualtion, whilst the Romulator I only has 32KB of emulation
It also will support hardware maptracing once they get their firmware working
I've still got to finish donig those maptrace updates for you guys. I've got way too much on my plate at the moment. Anyway better get back to work....