Setting Injection Multiplier

[tr0jan]

When you make changes to your tune - does it say 'Uploaded XXXX: XX' at the bottom of the screen?

Does nistune show ECU ID: 23710-xxxxx (FACTORY) or REV: xx at top of the screen. I dont think your board is installed properly into your ECU and it is using factory settings

How do I know if it is properly installed?

[Matt]

That looks okay. Can you post BIN file here?

[tr0jan]

That looks okay. Can you post BIN file here?

of course

[tr0jan]

That looks okay. Can you post BIN file here?

of course

222.bin

[tr0jan]

These injectors are installed in my engine. I can not find the information. Do you have any information on these injectors. Performance and lagtaym.

[tr0jan]

please help. I can not find the parameters of these injectors

[Matt]

I dont know either.... Sorry but cannot help with that one.

You have not posted the BIN tune file yet as requested so look at that tune

[tr0jan]

I dont know either.... Sorry but cannot help with that one.

You have not posted the BIN tune file yet as requested so look at that tune

I sent you a bin file and log in an email. info[@]nistune.com

[tr0jan]

http://dropmefiles.com/DiCmd

[Matt]

Replied. Those injectors are redrilled OEM injectors. I highly advise against using such type injectors. May be causing issues

[tr0jan]

tell when the engine is warming up AFR 12.5-13. as do 14.7 - 15? which table?

[Matt]

Temp enrich table is used for making richer during warmup

[tr0jan]

Temp enrich table is used for making richer during warmup

many tables in the program associated with the temperature. I Do not know what kind of answers

[Matt]

Enrich (Cold crank), Enrich (warm crank)

Please refer to our Mapping Guides and other documentation which cover the maps

[tr0jan]

Enrich (Cold crank), Enrich (warm crank)

Please refer to our Mapping Guides and other documentation which cover the maps

translation too distorted, I do not quite understand the text, which I translate Google.