Problems flashing featurepack
Moderator: Matt
Problems flashing featurepack
Trying to flash the featurepack to my type 4 Board.
I can`t find an exact match to my ECU so i tried the one marked in the Attached photo.
Does not work.
Wich one to use?
Thanks!
I can`t find an exact match to my ECU so i tried the one marked in the Attached photo.
Does not work.
Wich one to use?
Thanks!
Re: Problems flashing featurepack
Use 82F0F (replaces anything with 82F0x in it)
Re: Problems flashing featurepack
I tried that one with no success. Any tricks when it wants to change address files?
I need to be able to load my map in.
I need to be able to load my map in.
Re: Problems flashing featurepack
I would suggest you to explain in details what does it mean "I tried that one with no success."Tommey wrote:I tried that one with no success. Any tricks when it wants to change address files?
I need to be able to load my map in.
Re: Problems flashing featurepack
After flashing I got adress file mismatch and when I load my map it won't start.
Re: Problems flashing featurepack
Make sure you use the matching feature pack base map S14_SR20DET_82F0F_MT_EDM_FP_maps.bin
If you have a previous tune, you cannot just load it over the top (there are new and different parameters) otherwise it will mess up everything added to feature pack
Use File > Import to convert a previous tune to one for feature pack
If you have a previous tune, you cannot just load it over the top (there are new and different parameters) otherwise it will mess up everything added to feature pack
Use File > Import to convert a previous tune to one for feature pack
Re: Problems flashing featurepack
I have tried again with no success.
There isnt any EDM FP maps so i tried ADM and JDM.
I need a step by step explanation so i can get this up and running.
There isnt any EDM FP maps so i tried ADM and JDM.
I need a step by step explanation so i can get this up and running.
Re: Problems flashing featurepack
I see the problem... the 75F0F maps are not in the latest ROM pack
Attached are the files. Unzip them and put them in your Documents\Nistune\ROM_Pack\Type34\S14A_SR20DET folder
1. After this connect to your ECU
2. Load the S14_SR20DET_75F0F_MT_NATS_EDM_FP_maps.bin from this folde
3. File > Import > your previous tune
4. Upload to ECU
It should work from here. I'll fix the ROM pack up now to include this file
Attached are the files. Unzip them and put them in your Documents\Nistune\ROM_Pack\Type34\S14A_SR20DET folder
1. After this connect to your ECU
2. Load the S14_SR20DET_75F0F_MT_NATS_EDM_FP_maps.bin from this folde
3. File > Import > your previous tune
4. Upload to ECU
It should work from here. I'll fix the ROM pack up now to include this file
- Attachments
-
- S14_SR20DET_82F0F_MT_EDM_FP_maps.zip
- (65.13 KiB) Downloaded 140 times
Re: Problems flashing featurepack
This solved my problem, thanks Matt!
Re: Problems flashing featurepack
This firmware does not support fans? I have to run them manually.
Have to change the firmware for a newer one?
Have to change the firmware for a newer one?
Re: Problems flashing featurepack
Fan control temperature is adjustable in this feature pack version for S14/S14A/S15
Refer to the feature pack software guide for adjusting them
Refer to the feature pack software guide for adjusting them