RB25 Rev limiter

[fikemoo]

Hello guys just a curious post really, has any body using the z32 board with type 2 nistune had any issues with the rev limiter, im not sure why its taken me this long to see but i think my limit isnt working. when ever i hit the limiter the AVCR is seeing peak revs at about 7100 which is factory rev cut but i have mine set to 6900

it could be the AVCR over reading but i thought they were quite accurate

[Matt]

Try lowering it and see if it matches the lower limit. There is some hysteresis on the limiter cut/recovery