knocking on the boost, the angle of 8 degrees

[Bgtym]

Motor Stock rb25det s2
720cc.
MAF z32
stock manifold, Turbine China GT30, the compressor a\r70, the turbine a\r63
at 1.1 bar boost, constant knocking!
to prevent the detonation has lowered the angle up to 8 degrees. in the area of 4800rpm
EGT 870 AFR11, MAF z32 loaded to 4.6 volts. Ignition exhibited stroboskopom15 degrees!
spark with the number 7.
can be a problem of low angle of 8 degrees and EGT, turbine housing a\r 63?

[Matt]

Base timing definitely matching what you are seeing in consult?

[Bgtym]

Base timing definitely matching what you are seeing in consult?

angle of the map coincides with log
idling angle of 15 degrees
pulley and angle CONSULT match!


there is another problem
in the tuner mode start recording log, automaticly switches to stream mode and disappears records TP scales.

Display > Select Consult Registers
Tick the 'TP (load)' or for the NEO engines 'BFuel Schedule (TP)' tick box to enable load tracing again!
It does not work((

[Bgtym]

the problem is solved! CAS broken. at high rpm ignition timing to jump. we changed the CAS and easily set up the engine at high angles!




There is no record of TP scales

[Matt]

Untick all boxes (except RPM) and then try reticking items again. Let me know if this works (use 1.2.51 version)

[Bgtym]

Untick all boxes (except RPM) and then try reticking items again. Let me know if this works (use 1.2.51 version)

(using 1.2.51)
I turned off all the checkboxes, left only RPM . it has not helped
In tuner mode, has checkboxes TP
stream mode checkboxes TP missing

[Matt]

Works fine here. I can only suggest uninstall/reinstall to clear out bad registry values. After this do a debug log

Screenshot shows TP in stream mode, and TP gauge with trace

[Bgtym]

reinstalled the nistyun not helping
TP scale are not recorded in the log
In tuner mode, TP scale are present


click on the writing the log by is automatically switched to stream mode
in stream mode is not record scales TP


still have the an error

[Matt]

Did you uninstall before reinstall?

Please post a debug log here (or email to info AT nistune.com)

File > Configuration > Debug logging

[Bgtym]

Did you uninstall before reinstall?

Please post a debug log here (or email to info AT nistune.com)

File > Configuration > Debug logging

I created a thread in another section.)) where I threw Debug logging
viewtopic.php?f=5&t=3224

You can delete this topic