Infinit J30

Bernardd · Post by **Bernardd** » Mon Nov 19, 2007 12:44 am

Matt, have you looked at the J30 ecu at all? It's sorta like a 4dr z32 nonturbo, that needs a turbo in a bad way.

Matt · Post by **Matt** » Mon Nov 19, 2007 11:23 am

Yep its on the Type 1 list. I did one of these with a Rev3 board some time ago

J30 Maxima (VG30E)

Bernardd · Post by **Bernardd** » Mon Nov 19, 2007 2:19 pm

I see a maxima binfile but it's not the right one. My j30 has the n62 maf, the one in the binfiles has different values, looks like the z31 vq map to me.

Matt · Post by **Matt** » Mon Nov 19, 2007 5:53 pm

Bin files? Where abouts. Are you talking the VQ map directory?

Bernardd · Post by **Bernardd** » Tue Nov 20, 2007 12:43 am

I believe, and this may not be correct, it was in a bunch of files you sent a while back. If you have one, I'd like to take a look at it. Can I dump the file with nistune? I never thought to do that 'til now.

Matt · Post by **Matt** » Tue Nov 20, 2007 1:03 am

Have a look in the J30 directory which is in the Type 1 subdirectory in the releases area. I've uploaded all the bins tonight

Bernardd · Post by **Bernardd** » Tue Nov 20, 2007 4:08 am

I looked at both of those, neither have the correct vq map.

It turns out that after lifting the car up and inspecting it underneath that some poor body work was done to cover up a bad case of rust.

Matt · Post by **Matt** » Tue Nov 20, 2007 6:33 pm

Send me a ROM image through. Those ROMs ... one of them I extracted myself from a J30 posted to me and the other was emailed through

These are Type 1 so no imbuilt consult so you will need to pull the chip and read it in an EPROM programmer

We can compare the VQ maps then