good after.
I would like to get an inquiry about price for a map in Nistune
Or help.
We have a s13 blacktop swap SR20DET 94 'JDM board type 3
Internals stock
air filter apexi
flowmeter Z32
intercooler M-Line Mishimoto
370cc injectors stock
Cometic head gasket 1.3
ARP head studs
We would like to reach 300hp.
a greeting.
Angel
sr20det +300hp
Moderator: Matt
Re: sr20det +300hp
you will max out your injectors at 270hp, so change them first
Re: sr20det +300hp
Hi,
Nistune sells the Type 3 board for AUD$260.
There are a few other install options, but it is well documented on their website :
http://nistune.com/equipment-products-type3.php
To reach 300 RWHP you will need to change your injectors.
Personally i only made 230rwhp with a Blacktop SR20 AND 440CC S15 type injectors.
I would say get at least 550cc injectors, but maybe some 740cc to give your room for later. if your using race fuel at least 740's.
Stock nissan T28 turbo wont make 300 RWHP, you might get there with some fancy tuning and race fuel, but it will be out of its efficiency range by miles.
Look at a larger frame garret gt28/61 type turbo.
where are you located?
it might be best to find a local tuner who deals with nistune, they might do you a deal on the board install and tunning package.
Nistune sells the Type 3 board for AUD$260.
There are a few other install options, but it is well documented on their website :
http://nistune.com/equipment-products-type3.php
To reach 300 RWHP you will need to change your injectors.
Personally i only made 230rwhp with a Blacktop SR20 AND 440CC S15 type injectors.
I would say get at least 550cc injectors, but maybe some 740cc to give your room for later. if your using race fuel at least 740's.
Stock nissan T28 turbo wont make 300 RWHP, you might get there with some fancy tuning and race fuel, but it will be out of its efficiency range by miles.
Look at a larger frame garret gt28/61 type turbo.
where are you located?
it might be best to find a local tuner who deals with nistune, they might do you a deal on the board install and tunning package.
-
- Posts: 4
- Joined: Mon Aug 24, 2015 10:05 pm
Re: sr20det +300hp
OK thanks
Yes, we already have 50F05 type 3 (manual, "black top").
Currently only we use 98 octane.
We pending the 555cc, which recommend Nismo? Venom? subaru?
That turbo recommend?
GT2860RS or GT2871R
When I ask for a map, I mean a map of SR20DET similar to a Stage2a for example.
We are located in Spain, Andalucia, Seville
.
thnks
Yes, we already have 50F05 type 3 (manual, "black top").
Currently only we use 98 octane.
We pending the 555cc, which recommend Nismo? Venom? subaru?
That turbo recommend?
GT2860RS or GT2871R
When I ask for a map, I mean a map of SR20DET similar to a Stage2a for example.
We are located in Spain, Andalucia, Seville
.
thnks
-
- Posts: 301
- Joined: Sat Jun 21, 2008 1:50 am
- Location: Croatia
- Contact:
Re: sr20det +300hp
Only JECS /Bosch injectors (nismo,hks,ID,ASNU etc) will work without problems, don't "save" 50€ on driled injectors and latter spend hundreds on dyno trying to "solve" problemsOverlap_Angel wrote: We pending the 555cc, which recommend Nismo? Venom? subaru?
One is to small and will produce a LOT of heat and other has big lag use something modern GTX, HTA , BW EFR or Xona RotorOverlap_Angel wrote: GT2860RS or GT2871R
Search Pete's (PL user name) posts and see what to do , he has the most experience with SR engine ...
-
- Posts: 4
- Joined: Mon Aug 24, 2015 10:05 pm
Re: sr20det +300hp
Thank you very much for your answers
Hopefully soon clarify the problem.
Greetings to all
Hopefully soon clarify the problem.
Greetings to all
-
- Posts: 4
- Joined: Mon Aug 24, 2015 10:05 pm
Re: sr20det +300hp
There is a problem wing when the map if we choose a 550cc injectors?