rb25det CAMSHAFT 272 duration

Post here where your issue is not tuning specific but more of a sensor or mechanical issue
Post Reply
Bgtym
 

Posts: 63
Joined: Thu Sep 26, 2013 1:32 am

rb25det CAMSHAFT 272 duration

Post by Bgtym »

Hi guys
I want to put on the the camshaft rb25det nonNEO, but don `t know how to choose the duration 265 or 272.
if you set the duration 272 WTC need to be removed?

and a maximum lift is possible be installed without rework?
an example of what I found, the camshaft kelford 272 9.3. installed without rework the cylinder head.
bachig24u
 

Posts: 678
Joined: Mon Jun 01, 2009 11:46 pm
Location: Campbelltown, NSW
Contact:

Re: rb25det CAMSHAFT 272 duration

Post by bachig24u »

Measure the lobe to head clearance on all the pockets and you figure out how much lift the new cams can have.

Best ask supplier if VTC needs to be removed. Most after market cams won't fit the VTC any more.
Post Reply