http://www.dlpdesign.com/usb/io8.php
Motorola MPX4250GP
http://cache.freescale.com/files/sensor ... PX4250.pdf
Source from Mouser, Digikey etc
One way of wiring: This allows Port1 and Port2 for AFR inputs
Port 3 is for signal input
Pins pictured on MPX are 1. signal(white), 2. GND (green) 3. Power (5V)
Configuring (software manual - wideband section)
https://www.nistune.com/docs/NIStune%20 ... Manual.pdf
Select Wideband directory
C:\users\<name>\Documents\Nistune\Wideband\DLPADConverter
- AFM Auxiliary input 1 (0 - 5 volts, Ground) - afr1.csv
- Auxiliary input 2 (0 - 5 volts, Ground) - aux1.csv
- Auxiliary input 3 (0 - 5 volts, Ground) - aux2.csv
- Auxiliary input 4 (0 - 5 volts, Ground) - aux3.csv
- Auxiliary input 5 (0 - 5 volts, Ground) - aux4.csv
- Auxiliary input 6 (0 - 5 volts, Ground) - aux5.csv
Documents\Nistune\Wideband\DLPADconverter folder
aux2.csv file edit to look like:
Code: Select all
MPX Boost (PSI/InHg)
200,0
5000,37.7