I had an ecu get wet and stop working. i tried reflashing the base image thinking it got corrupt but im getting write failed wrote 0F got FF at 0x0000
and a test shows chip 1 d0 -d7 stuck high. so im guessing that it has a bad chip. from my deduction this would be the STK11C88-NF45I and if so can i replace this? and if so what is the current chip as this is out of production.
Bad Board
Moderator: Matt
Re: Bad Board
You will need to send it here for repairs. Yes the simteks are out of production a while ago after Cypress bought them out and we had to change the board design and also drop the voltage to 3.3V as 5V parts were also made obsolete!
d0 -d7 stuck high => Means probably it is the Xilinx chip since all lines are low
Contact me via the website or info@nistune.com for repairs
d0 -d7 stuck high => Means probably it is the Xilinx chip since all lines are low
Contact me via the website or info@nistune.com for repairs