Pops & Bangs/Retarding Timing

If it isnt a problem or a suggestion it probably goes here.

Moderator: Matt

FRimports
 

Posts: 12
Joined: Tue Dec 16, 2014 10:47 am

Re: Pops & Bangs/Retarding Timing

Post by FRimports »

Hello
So it works for me ,

I turn it up to the limiter, going from the gas,
and then give when the Rpm falls again a small burst of gas.

It makes Pop , Bang and spits fire

Works with this setting :
capture-20160427-214754.png
(216.13 KiB) Downloaded 3200 times
Sorry for my bad englisch ;)

Best regards
adamky
 

Posts: 41
Joined: Sun May 25, 2008 4:54 pm
Location: Louisville, KY, USA

Re: Pops & Bangs/Retarding Timing

Post by adamky »

FRimports wrote:Hello
So it works for me ,

I turn it up to the limiter, going from the gas,
and then give when the Rpm falls again a small burst of gas.

It makes Pop , Bang and spits fire
So, you have to manually feather the throttle to do this? Are you using launch control along with these map changes?
sr20det1
 

Posts: 4
Joined: Sun Sep 27, 2020 4:41 am

Re: Pops & Bangs/Retarding Timing

Post by sr20det1 »

Hi all, just resurrecting this thread as am still looking to make some flames with launch control, I know we cant do negative degrees yet but has anyone managed this with launch control?

Cheers
unkn0wn
 

Posts: 11
Joined: Tue Jul 31, 2012 11:55 am

Re: Pops & Bangs/Retarding Timing

Post by unkn0wn »

sr20det1 wrote: Mon Nov 02, 2020 12:53 am Hi all, just resurrecting this thread as am still looking to make some flames with launch control, I know we cant do negative degrees yet but has anyone managed this with launch control?

Cheers
I might be crazy,

but couldn't you set you cas -10 degrees out, then add 10 degrees to your timing table. Once you set your launch control to 0 deg it will be commanding -10 deg TT and possibly do what you want?
bachig24u
 

Posts: 678
Joined: Mon Jun 01, 2009 11:46 pm
Location: Campbelltown, NSW
Contact:

Re: Pops & Bangs/Retarding Timing

Post by bachig24u »

yes but every table needs modifying.
Post Reply