Higher contrast colours for trace ...

[Torque]

Is it possible to have a higher contrast colour for the trace, the trace is not easily discernable from the low contrast colour scheme of the cells.
Think of someone road tuning needing to have a quick look at the graph!

Possibly give the traced cells a black frame if not otherwise possible.

colout.jpg

(167.89 KiB) Downloaded 2107 times

[Matt]

Normally during road tuning I'm using the TRACE windows to look at boost and AFRs outputs, which offers a contrast over grey rather than these windows. Might be possible to add something like outline to these? Need to look into the grid control

[Torque]

Hi Matt,
I know that it is not easy to define a colour scheme ... might be worse than the actual coding.

I'll check out your recommendation, but for people without AFR/Boost measurement gear connected maybe you could just make (as an option) the traced cell black with the font white or similar?

Or (even better) have the user define his/hers colour(s) so you're completely 'off the hook' ?


Cheers

[RomChip200]

Same remark. Color gradient of the map vs. Trail color.

[Matt]

What I'll do is put this in for the colour selection on Right click > Trace trail colour

[RomChip200]

Waiting for this feature asap

[Matt]

It will happen in the next build which is still requiring some other changes. Should be a few weeks. I've just had surgery (foot) so bit held up at the moment with recovery

[Matt]

This has been added for next release