Nistune 1.3

[Matt]

Version 1.3.41

Add consult register support for upto 65 (including R34) and to 7F for MConsult
Add extra knock, timing and flex parameters into MConsult table
Add checks for Rev17 to use MConsult table and parameters
Add support for F1 instant stream/terminate
Updated consult raw view grid display
Increase consult parameter view grid display
Add high gear and octane indicators
Optimise calls for flex parameters for FP firmware only
Detect variations in ECU part number and FP version, and add import upgrades from FP1/2
Decimal place fix ups for tables and variable grid view. Font size adjust clean up
Fixes for S13 KA24DE address locations, updated FP ROM pack files to match

[Matt]

Version 1.3.42

Bug crash fix for webupdate timestamp set from installer
Fix for FP version check loop

[Matt]

Version 1.3.43

Change from TTP_MIN to TTP_MIN_NEO for WC34/R34 FP1.1/FP2.1 to resolve import issues
Remove crash on appplication close (float gauge manager)
Stop loop if no current ECU part number when importing file to FP/non FP
Set FP version to that of address file when loaded
Webupdate: when invalid time, reset check to next day

[Matt]

Version 1.3.43a

Address file fixes for S14-S15 models only. Fix for overlap between Feature Control flags 2 and Total Injection Multiplier
Requires update Feature Pack firmware to use Flat Shift with the updated address location

Nistune FP 2.0 ROM File Pack 2.16(EXE)

Rebuild of files S14-S15 for FP1.1 and FP2.1 moving flat shift (Feature control flag 2) location to F45E (this will show on the status bar when changing the tickbox with the updated 1.3.43a software)