No - there are no tickboxes to enable it
You should always see 'Pwr Steer' highlight when the input line is grounded
More details in the FP hardware manual:
http://nistune.com/docs/Nistune%20Featu ... nstall.pdf
Page 25 covers the pins used
Flat shift
Moderator: Matt
-
skylinegtrhr
- Posts: 301
- Joined: Sat Jun 21, 2008 1:50 am
- Location: Croatia
- Contact:
Re: Flat shift
Hi will there be maybe option to use LC and Flat shift in the same time?
Re: Flat shift
No that is not possible, due to using the switch for the same input and the conditions. So either one or the other!